Seagate Barracuda XT Barracuda XT Series SATA Product Manual - Page 10

Drive Specifications, Barracuda XT SATA Product Manual, Rev. D, ST33000651AS - 3tb /

Page 10 highlights

Drive Specifications 2.0 Drive Specifications www.seagate.com Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For convenience, the phrases the drive and this drive are used throughout this manual to indicate the following drive models: ST33000651AS ST32000641AS The specification summaries listed in the following tables are for quick reference. For details on specification measurement or definition, see the appropriate section of this manual. Table 1 Drive specifications summary for 3000GB and 2000GB models Drive specification ST33000651AS Formatted capacity (512 bytes/sector)* Guaranteed sectors Heads Disks Bytes per sector Default sectors per track Default read/write heads Default cylinders Recording density Track density(avg) Areal density (avg) Spindle speed Internal data transfer rate (max) Sustained data transfer rate OD(max) I/O data-transfer rate (max) ATA data-transfer modes supported Cache buffer Height (max) Width (max) Length (max) Weight (typical) Average latency Power-on to ready (typical) Standby to ready (typical) Startup current (typical) 12V (peak) Voltage tolerance (including noise) Operating temperature (Drive Case temperature) Nonoperating temperature (Ambient) Temperature gradient (max) Relative humidity Relative humidity gradient (max) Wet bulb temperature (max) 3000GB (3TB) 5,860,533,168 10 5 512 63 16 16,383 1941 kb/in 270 ktracks/in 488Gb/in2 7200 RPM 1900Mb/s 149MB/s 600MB/s PIO modes: 0 to 4 Multiword DMA modes: 0 to 2 Ultra DMA modes 0 to 6 64MB 26.1mm / 1.028 in 101.85mm / 4.010 in 146.99mm / 5.787 in 700g / 1.543 lb 4.16ms 18s 18s 2.0A 5V + 5% 12V + 10% 0° to 60°C -40° to 70°C 20°C per hour max (operating) 30°C per hour max (nonoperating) 5% to 95% (operating) 5% to 95% (nonoperating) 30% per hour 37.7°C max (operating) 40.0°C max (nonoperating) ST32000641AS 2000GB (2TB) 3,907,029,168 8 4 512 63 16 16,383 1721 kb/in 240 ktracks/in 347Gb/in2 7200 RPM 1300Mb/s 138MB/s 600MB/s PIO modes: 0 to 4 Multiword DMA modes: 0 to 2 Ultra DMA modes 0 to 6 64MB 26.1mm / 1.028 in 101.85mm / 4.010 in 146.99mm / 5.787 in 700g / 1.543 lb 4.16ms 15s 15s 2.8A 5V + 5% 12V + 10% 0° to 60°C -40° to 70°C 20°C per hour max (operating) 30°C per hour max (nonoperating) 5% to 95% (operating) 5% to 95% (nonoperating) 30% per hour 37.7°C max (operating) 40.0°C max (nonoperating) 10 Barracuda XT SATA Product Manual, Rev. D

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42

10
Barracuda XT SATA Product Manual, Rev. D
Drive Specifications
www.seagate.com
2.0
Drive Specifications
Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power.
For convenience, the phrases
the drive
and
this drive
are used throughout this manual to indicate the following
drive models:
The specification summaries listed in the following tables are for quick reference. For details on specification
measurement or definition, see the appropriate section of this manual.
ST33000651AS
ST32000641AS
Table 1
Drive specifications summary for 3000GB and 2000GB models
Drive specification
ST33000651AS
ST32000641AS
Formatted capacity (512 bytes/sector)*
3000GB (3TB)
2000GB (2TB)
Guaranteed sectors
5,860,533,168
3,907,029,168
Heads
10
8
Disks
5
4
Bytes per sector
512
512
Default sectors per track
63
63
Default read/write heads
16
16
Default cylinders
16,383
16,383
Recording density
1941 kb/in
1721 kb/in
Track density(avg)
270 ktracks/in
240 ktracks/in
Areal density (avg)
488Gb/in
2
347Gb/in
2
Spindle speed
7200 RPM
7200 RPM
Internal data transfer rate (max)
1900Mb/s
1300Mb/s
Sustained data transfer rate OD(max)
149MB/s
138MB/s
I/O data-transfer rate (max)
600MB/s
600MB/s
ATA data-transfer modes supported
PIO modes: 0 to 4
Multiword DMA modes: 0 to 2
Ultra DMA modes 0 to 6
PIO modes: 0 to 4
Multiword DMA modes: 0 to 2
Ultra DMA modes 0 to 6
Cache buffer
64MB
64MB
Height (max)
26.1mm / 1.028 in
26.1mm / 1.028 in
Width (max)
101.85mm / 4.010 in
101.85mm / 4.010 in
Length (max)
146.99mm / 5.787 in
146.99mm / 5.787 in
Weight (typical)
700g / 1.543 lb
700g / 1.543 lb
Average latency
4.16ms
4.16ms
Power-on to ready (typical)
18s
15s
Standby to ready (typical)
18s
15s
Startup current (typical) 12V (peak)
2.0A
2.8A
Voltage tolerance (including noise)
5V
+ 5%
12V
+ 10%
5V
+ 5%
12V
+ 10%
Operating temperature
(Drive Case temperature)
0° to 60°C
0° to 60°C
Nonoperating temperature (Ambient)
–40° to 70°C
–40° to 70°C
Temperature gradient (max)
20°C per hour max (operating)
30°C per hour max (nonoperating)
20°C per hour max (operating)
30°C per hour max (nonoperating)
Relative humidity
5% to 95% (operating)
5% to 95% (nonoperating)
5% to 95% (operating)
5% to 95% (nonoperating)
Relative humidity gradient (max)
30% per hour
30% per hour
Wet bulb temperature (max)
37.7°C max (operating)
40.0°C max (nonoperating)
37.7°C max (operating)
40.0°C max (nonoperating)