Schwinn Airdyne AD Pro Assembly and Owner s Manual

Schwinn Airdyne AD Pro Manual

Get Schwinn Airdyne AD Pro PDF manuals and user guides View all Schwinn Airdyne AD Pro manuals
Add to My Manuals
Save this manual to your list of manuals

Schwinn Airdyne AD Pro manual content summary:

  • Schwinn Airdyne AD Pro | Assembly and Owner s Manual - Page 1
    Manual en Español Latino Americano: http://www.schwinnfitness.com ASSEMBLY MANUAL / OWNER'S MANUAL
  • Schwinn Airdyne AD Pro | Assembly and Owner s Manual - Page 2
    Heart Rate Zones 25 Pausing / Results Mode 25 Console Service Mode 27 Calibration 27 Maintenance 28 Replacing the Console Batteries 29 Maintenance Parts 30 Troubleshooting 31 Warranty 33 To validate warranty support, keep the original proof of purchase and record the
  • Schwinn Airdyne AD Pro | Assembly and Owner s Manual - Page 3
    and void the warranty. • Do not use or put the machine into service until the machine has been fully assembled and inspected for correct performance in accordance with the Manual. • Use this machine only for its intended use as described in this manual. Do not use attachments not recommended by the
  • Schwinn Airdyne AD Pro | Assembly and Owner s Manual - Page 4
    . Use caution when you step on and off the machine. • Disconnect all power before servicing this use. • Do not over exert yourself during exercise. Operate the machine in the manner described in this manual. • Perform all regular and periodic maintenance procedures recommended in the Owner's Manual
  • Schwinn Airdyne AD Pro | Assembly and Owner s Manual - Page 5
    stop. Do not dismount the bike until the Pedals have come to use by anyone under 14 years of age. • Prior to use, read and understand the Owner's Manual. • Injury or death is possible if Caution is not used while using this machine. • Cease exercise ac, used in accordance with the instructions turning
  • Schwinn Airdyne AD Pro | Assembly and Owner s Manual - Page 6
    : Operating Voltage: 2 D Batteries (LR20) 3VDC Regulatory Approvals: Optional AC Power Adapter: U L listed, Rated 120V 60Hz Input, 9VDC, 1500mA Output. Class Instructions" before assembly. • Collect all the pieces necessary for each assembly step. • Using the recommended wrenches, turn the
  • Schwinn Airdyne AD Pro | Assembly and Owner s Manual - Page 7
    11 12 2 1 10 9 13 8 3 4 5 6 7 PARTS A decal has been applied to all right (" R ") and left (" L ") parts to assist with assembly. Item Qty Description 1 1 Frame Assembly 2 1 Console / Mast Assembly 3 1 Seat 4 1 Handlebar, Left 5 1 Foot Peg, Left 6 1 Pedal, Left 7 1 Stabilizer,
  • Schwinn Airdyne AD Pro | Assembly and Owner s Manual - Page 8
    HARDWARE / TOOLS A B C D E F Item Qty Description A 10 Button Head Hex Screw, M8x20 B 10 Lock Washer, M8 C 10 Flat Washer, M8 D 4 Socket Head Cap Screw, M8x25 Item Qty Description E 2 Flat Washer, M16 F 2 Shoulder Screw, M12x100 Note: S elect pieces of Hardware have been provided
  • Schwinn Airdyne AD Pro | Assembly and Owner s Manual - Page 9
    X8 1 A B C 8 ASSEMBLY 7 2. Attach Pedals to Frame Assembly Note: The Left Pedal is reverse-threaded. Be sure to attach Pedals on the proper side of the Bike. Orientation is based from a seated position on the bike. The Left Pedal has an "L", the Right Pedal an "R". 10 (R) 6 (L) 9
  • Schwinn Airdyne AD Pro | Assembly and Owner s Manual - Page 10
    3. Connect Cables and Attach the Console/Mast Assembly to Frame Assembly Note: Do not crimp the cables. 6mm 2 X2 A B C 10
  • Schwinn Airdyne AD Pro | Assembly and Owner s Manual - Page 11
    4. Attach Handlebar Arms to Frame Assembly Fully tighten hardware. Make sure the Handlebar Arms are secure before you exercise. 11 4 4 D 6mm D D 11
  • Schwinn Airdyne AD Pro | Assembly and Owner s Manual - Page 12
    5. Assemble Foot Pegs and Hardware, and Attach Foot Pegs to Frame Assembly NOTICE: Push the Shoulder Screw (F) completely through the Foot Peg, and press the Washer (E) tightly onto the end of the Foot Peg. Be sure the Washer does not touch the screw threads (F1). Do not let the Washer fall off the
  • Schwinn Airdyne AD Pro | Assembly and Owner s Manual - Page 13
    6. Attach Seat to Seat Post NOTICE: Be sure the Seat is straight. Tighten the nuts (3b) on the Seat bracket (3a) to hold the Seat in position. 3 3a 3b 3b 13
  • Schwinn Airdyne AD Pro | Assembly and Owner s Manual - Page 14
    AC power. For AC power, it is necessary to order the optional Power Adapter. If batteries and the Power Adapter are installed, the console will use the Power Adapter to operate. Note: If you use rechargeable batteries, the optional Power Adapter manual. Do not use or put the machine into service
  • Schwinn Airdyne AD Pro | Assembly and Owner s Manual - Page 15
    physically fit and able to move the machine safely. Use proper safety precautions and lifting techniques. 1. Secure the Crank Stabilizers. To adjust: 1. Place the machine in your workout area. 2. Turn the stabilizer feet to adjust until they are evenly balanced and in contact with exercise. 15
  • Schwinn Airdyne AD Pro | Assembly and Owner s Manual - Page 16
    Compartment Q Telemetry Heart Rate (HR) Receiver R Media Rack S Water Bottle Holder T Transport and Immobilization Strap U V X W Accessories U Power adapter W AirDyne® Air Diverter V Remote Heart Rate Chest Strap X French Canadian console overlay To order, go to www.schwinnfitness.com or
  • Schwinn Airdyne AD Pro | Assembly and Owner s Manual - Page 17
    Console Features The Console provides information about your workout on the display screens. Programs • Manual • 20/10 Interval • 30/90 Interval • Custom Interval • Time Target • Heart Rate Zones • Calorie Target • Kilojoules Target • Miles Target • Kilometers Target Tachometer Display Program Data
  • Schwinn Airdyne AD Pro | Assembly and Owner s Manual - Page 18
    time, depending on the pro- 12 gram in use. Time ticks up , KM) achieved during the workout. Manual and Interval programs start at 0 and 11. Battery indicator The battery indicator turns on when the battery level is physician before you start an exercise program. Stop exercising if you feel pain or
  • Schwinn Airdyne AD Pro | Assembly and Owner s Manual - Page 19
    the button for 3 seconds to go to SCAN mode and cycle through the rates automatically. Each rate is displayed for 3 the best procedures to control the intensity of your exercise. The Console can read telemetry HR signals from using a wireless chest strap or other telemetric heart rate monitor.
  • Schwinn Airdyne AD Pro | Assembly and Owner s Manual - Page 20
    may be higher or lower. Consult your physician for your individual target heart rate zone. Note: A s with all exercises and fitness regimens, always use your best judgment when you increase your exercise time or intensity. Heart Rate BPM (beats per minute) 250 200 150 100 50 FAT-BURNING TARGET
  • Schwinn Airdyne AD Pro | Assembly and Owner s Manual - Page 21
    these parts move the others do as well. Carefully mount the machine using the Foot Step Pad if necessary. Adjust the Seat and Pedals before assist with starting the workout. To increase the air resistance and workload, increase your level of activity. To exercise all the muscle groups in your arms,
  • Schwinn Airdyne AD Pro | Assembly and Owner s Manual - Page 22
    not dismount the bike until the Pedals have come to a complete stop. Locking the Fan Assembly / Storage When the machine is not in use, be sure Mode. Note: The Console does not have an On/Off switch. Manual Workout The Manual program lets you start a workout without entering any information. 1. Sit
  • Schwinn Airdyne AD Pro | Assembly and Owner s Manual - Page 23
    adjust the time in 5 second increments. Push ENTER to confirm and go to the next field. 6. The RECOVER field blinks. To change the value, use the Increase/Decrease buttons to adjust the time in 5 second increments. Push ENTER to confirm. 7. Push START/RESUME to start the timer. The Console starts
  • Schwinn Airdyne AD Pro | Assembly and Owner s Manual - Page 24
    Console in Idle Mode, push the CAL/kJ TARGET button one time. 3. The CALORIE metrics field blinks (default value is 100). To change the value, use the Increase/Decrease buttons to adjust in 25 calorie increments. 4. Push the START/RESUME button to start the timer, and start to pedal. The Console
  • Schwinn Airdyne AD Pro | Assembly and Owner s Manual - Page 25
    turns on. The default age is 35. To adjust the Age value, use the exercise program. Stop exercising if you feel pain or tightness in your chest, become short of breath, or feel faint. Contact your doctor before you use the machine again. Use cycles through the average and maximum values for CAL/ MIN, WATTS,
  • Schwinn Airdyne AD Pro | Assembly and Owner s Manual - Page 26
    through the metrics. The summaCrAyL/MINfor InteRPrMval programs shows total time, rounds and interval time. WATTS SPEED WATTS SPEED RATE Manual and TSaErLgEeCt TPrograms RATE Interval ProgSrEamLEsCT 20/10 INTERVAL 30/90 INTERVAL CUSTOM INTERVAL TIME TARGET 20/10 INTERVAL ENTER 30/90
  • Schwinn Airdyne AD Pro | Assembly and Owner s Manual - Page 27
    cumulative metrics field). Display cycles MI for 5 seconds, then KM for 5 seconds. 3. Push STOP/RESET to exit Console Service Mode. Push the Decrease revert to using the default, factory power curve, automatically taking into consideration the user's altitude provided by the unit's air pressure
  • Schwinn Airdyne AD Pro | Assembly and Owner s Manual - Page 28
    instructions can be used to maintain contact Nautilus Customer Service for replacement labels use, examine the exercise machine for loose, broken, damaged, or worn parts. Do not use ease operation. Note: Do not use petroleum based products. Check pedals When the machine is used in a Light Commercial environment
  • Schwinn Airdyne AD Pro | Assembly and Owner s Manual - Page 29
    will display the Battery Indicator icon when the batteries are around 25% of their rated power during power up. If you use rechargeable batteries, the optional power adapter will not recharge the batteries. To open the battery bay, remove the preinstalled screw (*) and the cover. When replacing the
  • Schwinn Airdyne AD Pro | Assembly and Owner s Manual - Page 30
    Maintenance Parts AA CC A DD EE B Z BB Y X W I HH H C FF GG D V UT II JJ H FF GG R S NN OO PP (X3) QQ EF G LL KK P Q J K I L RR MM GG Q O M N A Console B Console Mast C Water Bottle Holder D Frame E Stabilizer, Front F Transport Wheel G Fan Cage, Upper Right H Fan
  • Schwinn Airdyne AD Pro | Assembly and Owner s Manual - Page 31
    TROUBLESHOOTING Condition/Problem Console will not power up/ turn on/start Things to Check If bike has AC adapter, check electrical (wall) outlet If bike has AC adapter, check connection at unit If bike If the above steps do not resolve the problem, contact Customer Care for further assistance.
  • Schwinn Airdyne AD Pro | Assembly and Owner s Manual - Page 32
    . stuck key Calibration procedure If bike has AC adapter, disconnect and reconnect power adapter. If bike uses batteries, remove and reinsert batteries. Repeat Calibration procedure. Refer to the Calibration procedure video. If these steps do not resolve the problem, contact Customer Care for
  • Schwinn Airdyne AD Pro | Assembly and Owner s Manual - Page 33
    not extend to any territories or countries outside the United States and Canada. How to Obtain Service For Products purchased directly from Nautilus, Inc. contact the Nautilus office listed on the Contacts page of the products Owner's manual. You may be required to return the defective component to
  • Schwinn Airdyne AD Pro | Assembly and Owner s Manual - Page 34
    Nautilus® 8008311.081515.B Bowflex® Schwinn® EN Universal®
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
ASSEMBLY MANUAL / OWNER’S MANUAL
Manual en Español Latino Americano:
http://www.schwinnfitness.com