Sanyo PLV-HD2000 RS232C Expand - Page 18
CF_H-POS Command, 5.5. CF_V-POS Command
![]() |
UPC - 086483060502
View all Sanyo PLV-HD2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
PLV-HD2000 Expand Serial Command Functional Specifications 8.5.4. CF_H-POS Command Command "CF_H-POS_%1" [CR] "0000 - nnnn" ---- Directly specify setting value of Horizontal Position Input is PC "nnnn" indicates maximum value, which is current value of (Total Dots - Display Dots). "UP Increment setting value of Horizontal Position by 1 %1 "DN Decrement setting value of Horizontal Position by 1 Input is Video "0000 - 4095" ---- Directly specify settign value of Horizontal Position "UP Increment setting value of Horizontal Position by 1 "DN Decrement setting value of Horizontal Position by 1 Details Set Horizontal Position value (valid only when it is in the normal Power ON status) The value set by this command is not stored in projector's memory. Therefore, when the power is turned to ALL OFF status, the value returns to the original setting. (It is stored in Standby mode.) Note: When %1 is directly specified, CF_SETDISPADJ as well as this command is requied In order to apply the setting value to the display image. Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.5.5. CF_V-POS Command Command "CF_V-POS_%1" [CR] "0000 - nnnn" --- Directly specify settting value of Vertical Position "nnnn" indicates maximum value, which is current value of (Total Input is PC Line - Display Line). "UP Increment setting value of Vertical Position by 1 %1 "DN Decrement setting value of Vertical Position by 1 Input is Video "-mmm - nnnn" --- Directly specify setting value of Vertical Position "UP Increment setting value of Vertical Position by 1 "DN Decrement setting value of Vertical Position by 1 Details Set Vertical Position value (valid only when it is in the normal Power ON status) The value set by this command is not stored in projector's memory. Therefore, when the power is turned to ALL OFF status, the value returns to the original setting. (It is stored in Standby mode.) Note: When %1 is directly specified, CF_SETDISPADJ as well as this command is requied In order to apply the setting value to the display image. Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 18/56
![](/manual_guide/products/sanyo-plvhd2000-rs232c-expand-b40f268/18.png)