Sanyo PLV-HD2000 RS232C Basic - Page 9
POWER ON Command, 6 POWER OFF Command, 7 INPUT 1 Command, 8 INPUT 2 Command, 9 INPUT 3 Command
![]() |
UPC - 086483060502
View all Sanyo PLV-HD2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
PLV-HD2000 Basic Serial Command Functional Specifications 6.5 POWER ON Command COMMAND "C00" [CR] Detail Power ON When already Power is ON, no operation is started. When sending this command during Countdown in process, Countdown is terminated. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.6 POWER OFF Command (Immediate POWER OFF) COMMAND "C01" [CR] Detail Power OFF (Standby) This command immediately executes Power OFF operation without displaying "Power OFF" message, unlike the operation with ON-OFF button of the projector or remote control. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.7 INPUT 1 Command COMMAND "C05" [CR] Detail Select INPUT1. Note) When there is no board inserted to INPUT1, it is not executed. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.8 INPUT 2 Command COMMAND "C06" [CR] Detail Select INPUT2. Note) When there is no board inserted to INPUT2, it is not executed. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.9 INPUT 3 Command COMMAND "C07" [CR] Detail Select INPUT3 Note) When there is no board inserted to INPUT3, it is not executed. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 9/24
![](/manual_guide/products/sanyo-plvhd2000-rs232c-basic-10b6234/9.png)