Sanyo PLV-HD2000 RS232C Basic - Page 19

PLV-HD2000 Basic Serial Command Functional Specifications 7.4 Input Mode Read Command COMMAND "CR1" [CR] Detail Get the selected INPUT Acceptable "%1" [CR] Response "1" = INPUT1 is selected %1 "2" = INPUT2 is selected "3" = INPUT3 is selected "4" = INPUT4 is selected Unacceptable "?"[CR] 7.5 Lamp Time Read Command COMMAND "CR3" [CR] Detail Get the total lamp running hours Acceptable "%1‗%2‗%3‗%4"[CR] Response %1, %2 %3, %4 Lamp 1 data comes first, and then the data for Lamp 2, Lamp 3 and Lamp 4 are followed with a spece between them. %1 = lamp No.1 %2 = lamp No.2 %3 = lamp No.3 %4 = lamp No.4 e.g.: "0410‗0410‗0410‗0410" [CR] indicating → Lamp No.1 = 410 Hours Lamp No.2 = 410 Hours Lamp No.3 = 410 Hours Lamp No.4 = 410 Hours Note) "9999" is returned when the time is over 10000 hours. Unacceptable "?" [CR] 7.6 Setting Read Command COMMAND "CR4" [CR] Detail Get screen setting status of Ceiling and Rear Acceptable "%1" [CR] Response "11" [CR] = Normal Screen setting "10" [CR] = Picture is top/bottom reversed %1 (Status: both Rear and Ceiling are ON) "01" [CR] = Picture is left/right reversed (Status: Rear is ON) "00" [CR] = Picture is top/bottom and left/right reversed (Status: Ceiling is ON) Unacceptable "?" [CR] 7.7 Model Type Read Command COMMAND "CR5" [CR] Detail Get the code name Response Acceptable %1 "%1" [CR] "MA4A" Unacceptable "?" [CR] 19/24