Sanyo PLCXP51 Instruction Manual, PLC-XP51 - Page 43
Appendix, Cleaning Projection Lens, Air Filter Care And Cleaning
View all Sanyo PLCXP51 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
APPENDIX AIR FILTER CARE AND CLEANING Air Filter prevents dust from accumulating on surface of Projection Lens and Projection Mirror. Should Air Filter become clogged with dust particles, it will reduce Cooling Fans' effectiveness and may result in internal heat build up and adversely affect life of a projector. Clean Air Filter following steps below: 1 Turn off a projector, and disconnect AC power cord from AC outlet. 2 Turn a projector upside down and remove Air Filter (2 used) by pulling latches upward. 3 Clean Air Filter with a brush or wash out dust and particles. 4 Replace Air Filter properly. Make sure that Air Filter is fully inserted. CAUTION Do not operate a projector with Air Filter removed. Dust may accumulate on LCD Panel and Projection Mirror degrading picture quality. Do not put small parts into Air Intake Vents. It may result in malfunction of a projector. AIR FILTER Pull up and remove. RECOMMENDATION We recommend avoiding dusty/smoky environments when operating a projector. Usage in these environments may cause poor image quality. When using under dusty or smoky conditions, dust may accumulate on a lens, liquid crystal panels, or optical elements inside a projector. This condition may degrade quality of a projected image. When above symptoms are noticed, contact your authorized dealer or service station for proper cleaning. CLEANING PROJECTION LENS Follow these steps to clean Projection Lens: 1 Apply a non-abrasive camera lens cleaner to a soft, dry cleaning cloth. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents or other harsh chemicals might scratch a surface. 2 Lightly wipe a cleaning cloth over Projection Lens. 3 When a projector is not in use, replace Lens Cover. 43