Sanyo PLCXP51 Instruction Manual, PLC-XP51 - Page 24
Computer Input, Select Computer System Manually, Automatic Multi-scan System
View all Sanyo PLCXP51 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
COMPUTER INPUT WHEN SELECT INPUT 2 (5 BNC INPUT JACKS ) When connect a computer output [5 BNC Type (Green, Blue, Red, INPUT MENU Horiz. Sync and Vert. Sync.)] from a computer to G, B, R, H/HV and V jacks. 1 Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button to move a red frame pointer to INPUT Menu icon. 2 Press POINT UP/DOWN button to move a red arrow pointer to Input 2 and then press SELECT button. Source Select Menu will appear. Input 2 INPUT Menu icon Move a pointer (red arrow) to Input 2 and press SELECT button. 3 Press POINT UP/DOWN button and a red-arrow icon will appear. Move arrow to "RGB", and then press SELECT button. Source Select Menu Move a pointer to RGB and press SELECT button. AUTOMATIC MULTI-SCAN SYSTEM This projector automatically tunes to most different types of computers based on VGA, SVGA, XGA or SXGA (refer to "COMPATIBLE COMPUTER SPECIFICATION" on page 49). When a computer is selected, this projector automatically tunes to incoming signal and projects the proper image without any special setting. (Some computers need to be set manually.) The projector displays one of the Auto, -----, Mode 1/2/3/4/5, or the system provided in the projector. Auto ---- When projector cannot recognize connected signal as PC system provided in this projector, Auto PC Adjustment function operates to adjust projector and message "Auto" is displayed on SYSTEM Menu icon. When image is not provided properly, manual adjustment is required. (Refer to P26 and 27.) There is no signal input from computer. Make sure connection of computer and a projector is set correctly. (Refer to TROUBLESHOOTING on page 46.) PC SYSTEM MENU PC SYSTEM Menu icon Displays system being selected. Mode 1 User preset adjustment in MANUAL PC ADJUSTMENT. Adjustment data can be stored in the Mode 1-5. SVGA 1 Computer systems provided in the projector. The projector chooses proper system and displays it. ✽ Mode 1 and SVGA 1 are examples. SELECT COMPUTER SYSTEM MANUALLY PC SYSTEM MENU This projector automatically selects PC system among those provided in this projector and PC system can be also selected manually. 1 Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to move a red frame pointer to PC SYSTEM Menu icon. 2 Press POINT UP/DOWN button to move a red arrow pointer to system that you want to set, and then press SELECT button. PC SYSTEM Menu icon Displays system being selected. Systems on this dialog box can be selected. Custom Mode (1~5) set in PC ADJUST Menu. (P26, 27) 24