Sanyo PLCXF60 Instruction Manual, PLC-XF60 - Page 43
V-sync phase, Reset, Position, To store adjustment data, Store
View all Sanyo PLCXF60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Computer Adjustment Position Adjusts picture position. V-sync phase Adjust this item when the projected image is affected by the noise from the external equipment. (From 0 to 15) ✔Note: V-sync phase is not displayed as the item is initially checked off on My menu in the Setting menu. Change the My menu setting in the Setting menu (p51) when necessary to adjust V-sync. phase. Reset Resets all adjustments to their previous levels. Mode To store the adjustment data or clear the stored data, move the yellow frame pointer to Mode and then press the SELECT button. Store To store the adjustment data, select Store and press the SELECT button to display Mode dialog box. Move the yellow frame pointer to any of Mode 1 to 50 in which you want to store and then press the SELECT button. Free To clear the adjustment data previously set, select Free and press the SELECT button to display Mode dialog box. Move the yellow frame pointer to any of Mode 1 to 50 in which you want to clear and then press the SELECT button. Quit Exits the PC Adjust Menu. Press the SELECT button at the Display area and the Display area dialog box appears. To store adjustment data Vacant Mode shows the selected input, source and system, and values of "Fine sync," "Total dots," "Clamp," "Display area," and "Position." To clear adjustment data Computer Adjustment ✔Note: Fine sync. and Display area cannot be selected when "480i", "575i", "480p", "575p", "720p", "1035i", "1080i/50" or "1080i/60" is selected in the System menu (p40). 43