Sanyo PLC-XU45 Owners Manual - Page 20
Adjusting Screen
UPC - 086483046841
View all Sanyo PLC-XU45 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
BASIC OPERATION ADJUSTING SCREEN ZOOM ADJUSTMENT 1 Press the ZOOM button on the Top Control or the ZOOM L/M button on the Remote Control. The message "Zoom" is displayed. 2 Press the ZOOM L button or the POINT UP button to make image larger, and press the ZOOM M button or the POINT DOWN button to make image smaller. Zoom Message disappears after 4 seconds. FOCUS ADJUSTMENT 1 Press the FOCUS button on the Top Control or the FOCUS L/M button on the Remote Control. The message "Focus" is displayed. 2 Adjust focus of image by pressing the FOCUS L/M button or the POINT UP/DOWN button(s) . Focus Message disappears after 4 seconds. KEYSTONE ADJUSTMENT If the projected picture has keystone distortion, correct the image with KEYSTONE adjustment. 1 Press the KEYSTONE button on the Remote Control or select Keystone in the SETTING menu. (Refer to page 34.) The keystone dialog box appears. 2 Correct keystone distortion by pressing the POINT UP/DOWN/LEFT/RIGHT button(s). Press the POINT UP button to reduce the upper part of the image, and press the POINT DOWN button to reduce the lower part. Press the POINT LEFT button to reduce the left part, and press the POINT RIGHT button to reduce the right part. • The arrows are white when there is no correction. • The direction of the arrow being corrected turns red. • The arrow(s) disappear(s) at the maximum correction. Reduce the upper width with POINT UP button. Reduce the lower width with POINT DOWN button. Reduce the left part with POINT LEFT button. Reduce the right part with POINT RIGHT button. PICTURE FREEZE FUNCTION Press the FREEZE button on the Remote Control to freeze the picture on-screen. To cancel the FREEZE function, press the FREEZE button again or press any other button. 20