Sanyo PLC-XU40 Owners Manual - Page 9
Preparation, Positioning Projector, Adjustable Feet - projector lamp
UPC - 086483046377
View all Sanyo PLC-XU40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
PREPARATION POSITIONING PROJECTOR G This projector is designed to project on a flat projection surface. G The projector can be focused from 3.6'(1.1m) ~ 22.6'(6.9m). G Refer to the figure below to adjust a screen size. H1 : H2 = 26 : 1 ROOM LIGHT The brightness in a room has a great influence on picture quality. It is recommended to limit ambient lighting in order to provide the best image. 22.6' (6.9m) 17.4' (5.3m) 13.1' (4.0m) 8.5' (2.6m) 3.6' (1.1m) 43" 100" 82" 150" 126" 200" 166" 260" Max. Zoom 216" Min. Zoom H1 Screen Size (W x H) mm Zoom (min) Zoom (max) 36" 36" 732 x 549 3.6' (1.1m) ----- 43" 874 x 655 4.3' (1.3m) 3.6' (1.1m) 100" 2032 x 1524 10.5' (3.2m) 8.5' (2.6m) 150" 3048 x 2286 15.7' (4.8m) 13.1' (4.0m) 200" 4064 x 3048 21.0' (6.4m) 17.4' (5.3m) H2 260" 5283 x 3962 ----- 22.6' (6.9m) ADJUSTABLE FEET Picture tilt and projection angle can be adjusted by rotating ADJUSTABLE FEET. Projection angle can be adjusted up to 15.6 degrees. 1 Lift the front of the projector and pull the FEET LOCK LATCHES on both sides of the projector. 2 Release the FEET LOCK LATCHES to lock the ADJUSTABLE FEET and rotate the ADJUSTABLE FEET to adjust the position and tilt. 3 To retract the ADJUSTABLE FEET, lift the front of the projector and pull and undo the FEET LOCK LATCHES. Keystone distortion of the projected image can be adjusted by Menu Operation. (Refer to P20 and 36.) CAUTION Tilt the projector within the adjustable range in order not to shorten the life of the lamp. Proper angle should be taken. Refer to page 10. ADJUSTABLE FEET FEET LOCK LATCHES 9