Sanyo PLC-XU40 Owners Manual - Page 36
Setting
UPC - 086483046377
View all Sanyo PLC-XU40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
SETTING SETTING MENU 1 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT button(s) to move the red frame pointer to the SETTING Menu icon. 2 Press the POINT DOWN button to move the red frame pointer to the item that you want to set and then press the SELECT button. The Setting dialog box appears. Language The language used in the ON-SCREEN MENU is available in English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Russian, Chinese, Korean, and Japanese. SETTING MENU Set the red frame pointer to the item and press the SELECT button. SETTING Menu icon Keystone This function corrects the distorted image. Select either Store or Reset, and then press the Select button. The keystone dialog box appears. (Refer to page 20.) Store ···· stores the keystone adjustment data even if the AC Power Cord is disconnected. Reset ····resets the keystone adjustment data when the AC Power Cord is disconnected. When pressing the SELECT button at Language, the Language Menu appears. Blue back When this function is "On," the projector produces a blue image while input signal is not detected. Display This function decides whether to display On-Screen Displays. On ···· shows all the On-Screen Displays. Off ···· sets On-Screen Displays disappeared except; G ON-SCREEN MENU G "Power off?" message G P-TIMER G "No signal" message G"Wait a moment!" message Logo When this function is "On," the projector displays our logo when starting up. Move the pointer to the item and then press the POINT LEFT/RIGHT button(s). Ceiling function Ceiling When this function is "On," the picture is top / bottom and left / right reversed. This function is used to project the image from a ceiling mounting the projector. Rear function Rear When this function is "On," the picture is left / right reversed. This function is used to project the image to a rear projection screen. Terminal The COMPUTER IN 2 / MONITOR OUT terminal on the back of the projector can be used as computer input or monitor output by switching Terminal with the POINT LEFT/RIGHT button. To use the terminal as computer input, select Computer 2. To use the terminal as monitor out, select Monitor out. 36