Sanyo PDG-DSU30 RS232 Basic - Page 4

PDG-DSU30 Basic Serial Command Specifications 1 Overview 1.1. This specification defines projector control commands for the PDG-DSU30 series. 1.2. The projector control commands are designed to remote-control a projector through RS-232C from a computer. 2 Serial Interface Specification 2.1 Transfer Specification Items Specification Synchronous system Asynchronous Transmission Speed 9600 Data Length 8 bits Parity None Stop Bit 1 Flow Control None 2.1.1. Transmission speed: The initial setting value is 9600. 2.2 Connection Dedicated serial cable that meets to following specifications must be used for the connection to a computer and the projector. Connect COM port of the computer to SERIAL PORT IN of the projector. COM Port (COM1 or COM2) of a computer is specified by the control software of the computer. 4/17