Sanyo PDG-DSU30 RS232 Basic - Page 12

PDG-DSU30 Basic Serial Command Specifications 6.21 Image mode User 2 Command COMMAND "C16" [CR] Detail Set Image mode to User 2. This command changes Image mode immediately into User 2. The projector shows the OSD "Image mode User 2" on the screen at receiving the command. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.22 Image mode Classroom Command COMMAND "C17" [CR] Detail Set Image mode to Classroom. This command changes Image mode immediately into Classroom. The projector shows the OSD "Image mode Classroom" on the screen at receiving the command. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.23 Image mode Blackboard Command COMMAND "C18" [CR] Detail Set Image mode to Blackboard. This command changes Image mode immediately into Blackboard. The projector shows the OSD "Image mode Blackboard" on the screen at receiving the command. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.24 MENU ON Command COMMAND "C1C" [CR] Detail Show the main menu of On Screen Display. This command works the same as the "menu" key of the remote control, but it does not cancel out the menu. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.25 MENU OFF Command COMMAND "C1D" [CR] Detail Cancel out the main menu of On Screen Display. This command works the same as the "menu" key of the remote control, but it does not call up the menu. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 12 / 17