Samsung WF409ANW (English) - Page 20
Child lock, Garment, My cycle
View all Samsung WF409ANW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
washing a load of laundry 7 Signal selection button Start/Pause 8 selection button 9 Power button Press the button to increase or decrease the end of cycle signal volume or turn off the signal. (Off Softer Louder) Press to pause and restart programs. Press once to turn your washer on, press again to turn your washer off. If the washer is left on for more than 10 minutes without any buttons being touched, the power automatically turns off. Child lock A function that prevents children from playing with your washer. Once the Child Lock function is activated, the control panel cannot be activated, preventing children from playing with the washer. ACTIVATING/DEACTIVATING If you want to activate/deactivate the Child Lock function, press the Soil Level and Signal buttons at the same time for 3 seconds. How It works: 1. To activate or deactivate the Child Lock function, press and hold both the Soil level and Signal buttons for 3 seconds. Activation/Deactivating the Child Lock function is only available when the power is on. 2. When the Child Lock function is activated, and any button except for the Power button is pressed, the buzzer will sound for a short period and the "Child Lock" indicator will turn off for 10 seconds. 3. The Child Lock function stays on even after the power has been turned on and off or the power cord has been disconnected and reconnected. When buttons, other than the Power button, do not respond, please check if the Child Lock function is on. Garment+ You can add or take out laundry items even after the wash has started, as long as the "Garment+ " light is turned on. Pressing the Start/Pause button unlocks the door, unless the water is too hot or if there is too much water in your washer. If you are able to unlock the door and wish to continue the wash cycle, close the door and press the Start/Pause button. My cycle Allows you to activate your custom wash (temperature, spin, soil level, etc.) with one-button convenience. By pushing the My Cycle button, you activate the settings used during the My Cycle mode. The "My Cycle" light will indicate activation. You can select all options as follows in the My Cycle mode. 1. Select cycle using the Cycle Selector. 2. After cycle selection, set each option. See page 32 for available option settings with each cycle. 3. Then, you can store the cycle and options you select by pressing the Start/Pause button in the My Cycle mode. The cycle and options you select will be displayed the next time you choose the My Cycle function. You can change the My Cycle settings by repeating the same process above. The last used setting will be displayed the next time you choose the My Cycle function. 20_ washing a load of laundry WF409ANW-02657D-02_EN.indd 20 2009-12-04 ¿ÀÀü 11:19:42