Samsung WA51DG5505AWUS User Manual - Page 24

Level the washer, STEP 4

Get Samsung WA51DG5505AWUS PDF manuals and user guides View all Samsung WA51DG5505AWUS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 24 highlights

Installation * A (*): Min. 6 in. (152 mm), Max. 8 in. (203 mm) 3. Route the drain hose to the drain system. CAUTION • If using a standpipe, make sure the standpipe and drain hose connection is not airtight. • If using a standpipe, make sure the drain hose is inserted at least 6 in. (152 mm) but no more than 8 in. (203 mm) into the standpipe. 4. Secure the drain hose with cable ties. STEP 4 Level the washer A 1. Slide the washer into position. 2. Open the lid of the washer, and then pour water into the tub until the blades of the pulsator on the bottom of the washer are about half covered. 3. If the washer is level, the pulsator (A) will be positioned at the center of the tub as shown in the figure and the water will appear level in the tub. That is, the water will reach the same height on all sides of the tub. 24 English Untitled-10 24 2024-01-03 4:32:15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
Installation
English
24
*
A
(*): Min. 6 in. (152 mm), Max. 8 in. (203 mm)
3.
Route the drain hose to the drain system.
CAUTION
•
If using a standpipe, make sure the standpipe and
drain hose connection is not airtight.
•
If using a standpipe, make sure the drain hose is
inserted at least 6 in. (152 mm) but no more than 8 in.
(203 mm) into the standpipe.
4.
Secure the drain hose with cable ties.
STEP 4
Level the washer
A
1.
Slide the washer into position.
2.
Open the lid of the washer, and then pour water into
the tub until the blades of the pulsator on the bottom
of the washer are about half covered.
3.
If the washer is level, the
pulsator (A)
will be
positioned at the center of the tub as shown in the
figure and the water will appear level in the tub. That
is, the water will reach the same height on all sides
of the tub.
Untitled-10
24
2024-01-03
°° 4:32:15