Samsung NZ30M9880UB User Manual - Page 19
Initial cleaning, Digital display, Safety shutoff, Operation, Switching the appliance
View all Samsung NZ30M9880UB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Operation Operation Initial cleaning Wipe the ceramic glass surface with a damp cloth and ceramic cooktop glass cleaner. WARNING Do not use caustic or abrasive cleaners. The surface could be damaged. Digital display • to , selected heat settings • Residual heat (Still Hot) • Residual heat • The child lock is activated. • message. A touch key has been touched and held for more than 8 seconds. • message. The cooktop has overheated because of abnormal operation. (Example : An element was turned on with empty cookware on top.) • The cookware is unsuitable or too small or no cookware has been placed on the cooking zone. • message. The power applied to the cooktop is too high or low. Safety shutoff • If the cooktop overheats because of abnormal operation, will be displayed and the cooktop will turn off. • If cookware is unsuitable or too small or no cookware has been placed on the cooking zone, will be displayed. After 1 minute, the corresponding cooking zone will turn off. Other reasons why a cooking zone will switch itself off All cooking zones will switch themselves off if liquid boils over and lands on the control panel. The automatic shutoff will also be activated if you place a damp cloth on the control panel. In both of these instances, you will need to turn the cooktop on again using the main POWER key after the liquid or the cloth has been removed. Switching the appliance on Turn the cooktop on by touching the POWER key for approximately 1 second. NOTE After you have touched the POWER key to switch on your cooktop, you must select a cooking zone or element and a power setting within approximately 20 seconds. Otherwise, the cooktop will switch itself off for safety reasons. Selecting a cooking zone and power setting 1. To select an element or cooking zone, touch the ON/OFF key of the zone or element. • The digital displays will show . 2. To set and adjust the power level, run your finger clockwise or counterclockwise along the surface of the element or zone control as shown in the illustration. • If you do not set a power level after selecting an element, the element will turn off automatically after 10 seconds. • You can also use the magnetic knob to control the element or cooking zone. See page 18. English 19 NZ30M9880UB_DG68-00823B-04_EN+MES+CFR.indb 19 2018-08-29 2:43:01