Samsung CXE1931 Owner Instructions - Page 17
Selecting the Signal Source, Programming the Channels
![]() |
View all Samsung CXE1931 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
TV OPERATION Selecting the Signal Source The first step m programming your TV/VCR is to select the signal source in your home's antenna or cable TV system 1 With the main menu on the screen, press CH until "Setup" is highlighted. For information on viewing the main menu, see page 3.2 Press VOL. +. 2 You will see the Setup menu. Air/Cable" is highlighted. Press VOL - or VOL + button to select "Antenna," "Cable STD," "Cable HRC," or Cable IRC." If your TV/VCR is connected to an antenna, select "Antenna ." If you have cable TV, select "Cable STD," "Cable HRC," or "Cable IRC," depending on the type of cable system you have. If you are not sure what type of cable system you have, contact your cable company. Programming the Channels Storing Channels in Memory Your TV/VCR can automatically memorize all the channels you receive. Once these channels are in memory you can use the CH and buttons to select the channels, eliminating the need to enter individual channel digits with the number buttons. 1 With the menu on the screen, press CH until "Setup" is highlighted Press VOL +. Timer Record For information on viewing the main menu, see page 3.2. You must have already selected the signal source. For more information on selecting the signal source, see above. continued... 3 . 3 C H A P T E R T H R E E T V OP E R A T I O N
![](/manual_guide/products/samsung-cxd1342c-owner-instructions-fbea0a5/17.png)