Reebok Super Ramp Rl 7.0 Elliptical English Manual - Page 8

4. Apply a generous amount of the included grease to the axle on the right side of the Upright (6). 4 Identify the Right Pivot Cover (53) and the Right Upper Body Leg (12), which are marked with “"Right”" stickers, and orient them as shown. Do not remove the wire tie from the Right Upper Body Leg. Slide the Right Pivot Cover (53) and the Right 6 Upper Body Leg (12) onto the right side of the Upright (6). Attach the Right Upper Body Leg (12) with a 5/16" x 1" Patch Screw (81), an Upper Body Axle Cover (94), and a 5/16" Washer (104). Repeat this step on the other side of the elliptical. Grease 53 Wire Tie 104 94 81 12 5. Identify the Right Pedal Plate (107), which is attached to the Right Pedal (62). The Right 5 Pedal is marked with a “"Right”" sticker. Attach the Right Pedal Plate (107) to the Right Pedal Arm (8) with three 3/8" x 2 1/2" Patch Screws (88). Repeat this step to attach the Left Pedal Plate (not shown) and the Left Pedal (56). 62 56 107 8 88 8