Reebok Super Ramp Rl 7.0 Elliptical English Manual - Page 7
Tip: To prevent the Wire Harness 54
View all Reebok Super Ramp Rl 7.0 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
2. With the help of another person, place the packing inserts under the rear of the Frame (1) as shown. Have the other person hold the elliptical to prevent it from tipping until this step is completed. Next, hold the Rear Stabilizer (3) under the Frame (1). Attach the Rear Stabilizer with four 3/8" x 2 1/2" Patch Screws (88). With the help of the other person, remove the packing inserts and lower the Rear Stabilizer (3) and the Frame (1). 2 1 3 88 88 Packing Inserts 3. Have another person hold the Upright (6) near the Frame (1). See the inset drawing. Locate the wire tie in the Upright (6). Tie the lower end of the wire tie to the Wire Harness (54). Next, pull the upper end of the wire tie until the Wire Harness is routed completely through the Upright. Then, untie and discard the wire tie. Tip: To prevent the Wire Harness (54) from falling into the Upright (6), secure the Wire Harness with the wire tie. Tip: Avoid pinching the Wire Harness (54). Insert the Upright (6) into the Frame (1). Attach the Upright with a 5/16" x 1" Patch Screw (81) and a 5/16" Split Washer (105) in the indicated location. 3 Wire Tie 1 105 81 Avoid pinching the Wire Harness (54) 6 Wire Tie 54 54 6 Wire Tie 7