Reebok 710 Elliptical English Manual - Page 13
Tip: Avoid damaging the Pivot Axle Cover
View all Reebok 710 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
11. Apply grease to a Link Arm Axle (94) and to an M17 Wave Washer (88). First, insert the Link Arm Axle (94) into the Right Upper Body Leg (6) from the side shown. Next, slide the M17 Wave Washer (88) onto the Link Arm Axle. Then, insert the Link Arm Axle into the Right Link Arm (90). Insert a hex key into the M8 x 25mm Screw (128) in the Link Arm Axle (94). Using a second hex key, tighten another M8 x 25mm Screw (128), a Pivot Axle Cover (111), and an M8 x 25mm x 1.5mm Washer (126) into the other end of the Link Arm Axle (94). Tip: Avoid damaging the Pivot Axle Cover when tightening the Screw. Repeat this step on the other side of the elliptical. 11 7 91 128 94 Grease 6 88 90 126 111 128 12. Tighten the six M8 x 45mm Bolts (104) and the eight M8 x 16mm Screws (102). 12 Then, press the Top Cover (23) into the Right and Left Frame Covers (21, 22). 104 104 102 21, 22 23 102 13