Reebok 710 Elliptical English Manual - Page 10
Assemble the Left Upper Body Arm 9
View all Reebok 710 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
5. Identify the Right Upper Body Arm (8) and the Right Upper Body Leg (6) and orient them as 5 shown. Insert the Right Upper Body Arm (8) into the Right Upper Body Leg (6). Attach the Right Upper Body Arm (8) with three M8 x 45mm Bolts (104) and three M8 Locknuts (105). Make sure that the Locknuts are inside the hexagonal holes. Do not fully tighten the Bolts yet. Assemble the Left Upper Body Arm (9) and the Left Upper Body Leg (7) in the same way. 9 104 105 7 8 104 105 Hexagonal Holes 104 6 6. Using a small plastic bag to keep your fingers clean, apply a generous amount of the included grease to the Upright Axle (48) and to two M17 Wave Washers (88). Tip: Avoid damaging the Upright Wire (60). Insert the Upright Axle (48) through the Upright (5) and center it. Slide an M17 Wave Washer (88) onto each side of the Upright Axle. Slide the Right and Left Upper Body Arms (8, 9) onto the right and left sides of the Upright Axle (48). Tighten an M8 x 16mm Screw (102) and an M8 x 25mm x 1.5mm Washer (126) into each end of the Upright Axle (48) at the same time. 6 102 126 Avoid damaging the Upright Wire (60) 9 60 88 48 Grease 5 88 8 126 102 10