Rane MLM103 MLM103 Data Sheet - Page 4

Rear Panel, Architectural Specifications, Front Panel with Security Cover Installed

Page 4 highlights

MLM103 MIC/LINE MIXER Front Panel with Security Cover Installed Rear Panel Architectural Specifications The Mixer shall be a high performance Mic/Line Mixer featuring six balanced, studio-grade microphone inputs and two balanced, stereo line-level inputs. The microphone preamplifiers shall feature direct outputs able to monitor the signal pre- or post- the mix Level control. Each microphone and stereo line input shall feature three-band EQ and mix level controls. Peak detecting input overload indicators shall be provided. The Mixer shall have A, B and AUX outputs with independent level controls and 10 segment level meters with peak hold. Each balanced output shall provide an additional 6 dB of gain and deliver a minimum signal level of +24 dBu into a 10 kΩ load. All connections shall be via Euroblock connectors. Microphone inputs shall operate in Mic mode with a gain range of +12 dB to 60 dB. Each pair of microphone inputs may operate with or without 12 volt phantom power. Each microphone input shall be capable of line-level operate with a gain range of -4 to 12 dB. If Line mode is selected, phantom power is defeated. Each microphone input may be assigned to the A, B or AUX output bus. Stereo Line inputs shall accommodate +24 dBu signal levels with a gain range is -∞ to +12 dB. Each stereo line input shall feature a mono switch, A-B and AUX assign switch. The Mixer shall include a security cover for the equalizer section and output assign switches, leaving only the level controls and metering exposed. The Mixer shall feature a built-in, high efficiency, universal voltage power supply capable of operating from 100 to 240 VAC, 50-60 Hz. The unit shall feature an IEC socket and line cord. The unit shall meet UL/CSA and CE safety requirements. The unit shall be constructed of cold-rolled steel and mount into a standard 19" 3U EIA rack. The unit shall be a Rane MLM103 Mic/Line Mixer. ©Rane Corporation 10802 47th Ave. W., Mukilteo WA 98275-5000 USA TEL 425-355-6000 FAX 425-347-7757 WEB rane.com Data Sheet-4 All features & specifications subject to change without notice. 1-2014

  • 1
  • 2
  • 3
  • 4

MLM103
MIC/LINE MIXER
Data Sheet-4
All features & specifications subject to change without notice. 1-2014
©Rane Corporation
10802 47th Ave. W.,
Mukilteo WA 98275-5000
USA
TEL 425-355-6000
FAX 425-347-7757
WEB rane.com
Rear Panel
Architectural Specifications
°e Mixer shall be a high performance Mic/Line Mixer fea-
turing six balanced, studio-grade microphone inputs and two
balanced, stereo line-level inputs. °e microphone preamplifiers
shall feature direct outputs able to monitor the signal pre- or
post- the mix Level control. Each microphone and
stereo
line
input shall feature three-band EQ and mix level controls. Peak
detecting input overload indicators shall be provided. °e Mixer
shall have A, B and AUX outputs with independent level controls
and 10 segment level meters with peak hold. Each balanced
output shall provide an additional 6 dB of gain and deliver a
minimum signal level of +24 dBu into a 10 kΩ load. All connec-
tions shall be via Euroblock connectors.
Microphone inputs shall operate in Mic mode with a gain
range of +12 dB to 60 dB. Each
pair
of microphone inputs may
operate with or without 12 volt phantom power. Each micro-
phone input shall be capable of line-level operate with a gain
range of -4 to 12 dB. If Line mode is selected, phantom power is
defeated. Each microphone input may be assigned to the A, B or
AUX output bus.
Stereo Line inputs shall accommodate +24 dBu signal levels
with a gain range is -∞ to +12 dB. Each stereo line input shall
feature a mono switch, A-B and AUX assign switch.
°e Mixer shall include a security cover for the equalizer
section and output assign switches, leaving only the level controls
and metering exposed.
°e Mixer shall feature a built-in, high efficiency, universal
voltage power supply capable of operating from 100 to 240 VAC,
50-60 Hz. °e unit shall feature an IEC socket and line cord.
°e unit shall meet UL/CSA and CE safety requirements. °e
unit shall be constructed of cold-rolled steel and mount into a
standard 19" 3U EIA rack.
°e unit shall be a Rane MLM103 Mic/Line Mixer.
Front Panel with Security Cover Installed