Rane MLM103 MLM103 Data Sheet - Page 2

MLM103 MIC/LINE MIXER Features and Specifications Parameter Mic Inputs: Type ......Connectors ......Input Impedance Mic Mode ......Input Impedance Line Mode ......Gain Range Mic Mode ......Max Input Mic Mode ......Gain Range Line Mode ......Max Input Line Mode ......Frequency Response ......Equivalent Input Noise ......Common Mode Rejection ......THD+N ......Phantom Power Stereo Line Inputs: Type ......Connectors ......Input Impedance ......Gain Range ......Maximum Input ......Frequency Response ......Common Mode Rejection ......THD+N Tone Controls: Type ......Boost/Cut Range ......Low ......Mid Specification Active balanced Euroblock 1.49 k 8 k 12 to 60 +8 / -40 -4 / +12 +24 / +8 50 Hz-50 kHz 10 Hz-50 kHz -127 60 0.01 12 Active balanced Euroblock 10 k -infinity to +12 +24 / +12 10 Hz-50 kHz 40 0.005 Baxandall ±12 ±6 ±6 ......High Outputs: Type ......Connector ......Output Impedance ......Maximum Output ......Noise Floor ±6 Active balanced Euroblock 200 +24 -100 -89 ......Crosstalk ......Control Feed-through Meters: Type ......Range ......Number of Segments ......Peak Hold Power Supply Requirement Unit: Conformity ......Construction ......Size ......Weight Shipping: Size ..........Weight Note: 0 dBu=0.775 Vrms Data Sheet-2 -80 -80 Average dBu -20 to +10 10 1 sec 100 to 240 FCC, CCSAUS All Steel 5.25"H x 19"W x 5.3"D (3U) 9 lb 11" x 23" x 16" 13 lb Limit Units Conditions/Comments 1% 1% 2 1 +.5,-3 +.5,-3 typ min typ 5% Ω Ω dB dBu dB dBu dB dB dBu dB % VDC Accepts 12-24 AWG wire 745 Ω each leg, 1 kHz 4 kΩ each leg, 1 kHz Min/max, 1 kHz Min/max gain, 1 kHz Min/max, 1 kHz Min/max gain, 1 kHz Mic gain=60 dB Mic gain=12 dB Mic gain 60 dB, Rs=150Ω 20Hz-20kHz 1 kHz, Rs=150Ω, gain=60 dB Mic gain=40 dB, +4 dBu, 20 Hz-20 kHz Disabled in Line mode 1% Ω typ. dB dBu +.5/-3 dB min dB typ % typ dB typ dB typ dB typ dB Each leg, common mode or differential 1 kHz Min/max gain, 1 kHz 1 kHz, Rs=150Ω 20 Hz-20 kHz, +4 dBu, Load=10 kΩ 2 stage, bass and treble shelving All filters Boost/cut at 300 Hz Boost/cut at 300 Hz & 3.3 kHz, center 1 kHz Boost/cut at 3.3 kHz Accepts 12-24 AWG wire 1% Ω 100 Ω each leg, 1 kHz min dBu Load=10 kΩ, 1 kHz typ dB No inputs assigned typ dB Any line-level input assigned, output lev- els at max, 20 Hz to 20 kHz, re +4 dBu max dB Any input to any output @ 1 kHz max dB All front panel assign and level controls dBu VAC 50/60 Hz, 20 watts 247105 (13.3 cm x 48.3 cm x 13.5 cm) (4.1 kg) (27.9 cm x 58.4 cm x 40.6 cm) (5.9 kg)