Pyle SLSPGN10 Instruction Manual - Page 7

PROTECTION MODE: Shortcircuit/Overpower Protection: If the AC output had a short circuite or overpowered (Load(s) power>100W), the unit will shutdown AC output to protect itself, "AC"letter on the LED screen will switch to "DC". please clear the problem and re-press the AC button for AC output. *Some devices, such as a laser printer may require a peak power to start or work during a very time period, the peak power could exceed 100W or even higher, this could cause overpower protection with this unit. Please remove the devices and consult with the device manufacturers for more information.please clear the problem and re-press the AC button for AC output. 4. How to use the emergency light? This product has emergency light, press the on the control panel, then you can turn on the emergency light, press the to switch the brightness (Support 2 level brightness) 5. How to recharge the product? Connect the AC plug of standard charging adapter for this product to the household AC socket, connect the DC plug of standard charging adapter with the DC input interface of this product, then this product can be charged. At this time, the battery icon will light up, the light will run. When the product is full of power, the battery icon will fully light. After the power station is fully charged, please remove the charger in time. }~ AC
Socket ⛽ · Charging time about 8 hrs With a AC Adapter (15V/2A) 6 www.PyleUSA.com