Pyle SLPPTB22 Instruction Manual - Page 5
Step 2
![]() |
View all Pyle SLPPTB22 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
STEP 2 Hardware Needed: H4 Bolt M8x60MM 4.PCS H7 M8 Lock nut 4.PCS H14 M8 Washer 8.PCS P2 Caster Beams 2.PCS P3 M10 Lock nut 8.PCS • Attach Middle Plate (P3) to Caster Beams (P2) as shown in the above image. • Thread the Bolt (H4) through the Washer (H14), both Steel Frames, another Washer (H14) and secure with Lock Nut (H7). • Repeat for both Caster Beams then tighten completely. www.SereneLifeHome.com 5
![](/manual_guide/products/pyle-slpptb22-instruction-manual-8efa7d7/5.png)
www.SereneLifeHome.com
5
STEP 2
Hardware Needed:
• Attach Middle Plate (P3) to Caster Beams (P2) as shown in the above image.
• Thread the Bolt (H4) through the Washer (H14), both Steel Frames, another
Washer (H14) and secure with Lock Nut (H7).
• Repeat for both Caster Beams then tighten completely.
H4
P3
H7
H14
P2
M8 Lock nut 4.PCS
Bolt M8x60MM 4.PCS
M10 Lock nut 8.PCS
Caster Beams 2.PCS
M8 Washer 8.PCS