Pyle PSKIW25BK PSKIW25GN Manual 1 - Page 6

9.0 Ski Mode - Ski Function Overview Current Temperature Current Altitude Travel Time Period Accumulative Ascent Accumulative Descent Current Ski Speed Ski Log Function Ski Mode Function Flashing m/h Ski Mode Ski Function ON Record 1 Lap 1 Ski Lap Ski Record Ski Logbook Ski Mode ! Once the Ski Function is turned ON, the 'Ski' icon ' ' flashes. The Watch will: ! Exhibit the current ski data on the display, and ! Log (the Ski Log Function) the ski data into the Ski Logbook automatically or manually. NOTE: The Watch will log the ski data continuously once the Ski Function is turned ON even if the Watch is switched to other function modes subsequently. Ski Logbook ! The Logbook organizes the ski data as follows: ! Ski Lap - The ski data are recorded when the skier starts/stops a ski run. ! Ski Record - The ski record stores a series of Ski Laps, and hence it provides a summary of all Ski Laps. Ski Recall Mode ! The logged ski information can be reviewed from the Ski Logbook in the Ski Recall Mode. Check the coming chapter 10.0 for more details. 9.1 Ski Mode - How to Turn ON/OFF the Ski Function hold [M] Not Flashing Ski Function OFF SE T SE T hold [S/S] SE T How to Turn ON the Ski Function ! Hold down the [M] button in Ski Mode until the 'ON' indicator flashes. ! When the 'ON' indicator is flashing, hold down the [S/S] button until the 'dONE' indicator appears. ! Then the Ski Function is turned ON, and the ski icon will be flashing on the display. NOTE: The Ski Function will be turned OFF automatically after it has been turned ON for 12 hours. How to Turn OFF the Ski Function ! Hold down the [M] button in Ski Mode until the 'OFF' indicator flashes. ! Hold down the [S/S] button until the 'dONE' indicator appears. ! Then the Ski Function is turned OFF, and the ski icon stops flashing on the display. hold [S/S] SE T hold [M] m/h Flashing Ski Function ON 9.2 Ski Mode - Ski Mode Display Not Flashing Flashing m/h Ski Mode [S/S] current temperature current altitude Change the Top Row Display [L/R] current decent speed total elapsed time m/h Flashing Ski Mode Ski Function ON [L/R] [L/R] [L/R] accumulative ascent accumulative descent Change the Middle Row Display Flashing m/h Ski Mode hold [L/R] current time current lap no. Change the Bottom Row Display Ski Mode Display ! Once the Ski Mode is selected, performing below key operations can select the Ski Mode sub-functional displays. Change the Top Row Display ! Press the [S/S] button to change the top row display between Current Altitude and Current Temperature. IMPORTANT: If the user intends to get an accurate reading of air temperature, the user must take off the watch from the wrist for 20 to 30 minutes before getting the actual measurement. It allows no body temperature effect on the Watch. Change the Middle Row Display ! Press the [L/R] button to change the middle row display among Ski Run's Current Descent Speed, Total Elapsed Time, Accumulative Descent and Accumulative Ascent. NOTE: This setting can only be changed when the Ski Function is turned ON. Change the Bottom Row Display ! Hold down the [L/R] button to change the bottom row display between Current Time and Current Lap. NOTE: This setting can only be changed when the Ski Function is turned ON. 9.3 Ski Mode - Change the Measurement Unit Not Flashing m/h Flashing Ski Mode Ski Function ON m (meter) hold [S/S] ft (feet) hold 8C (Celsius) [S/S] 8F (Fahrenheit) hold m/h [S/S] Km/h (mile per hour) (Kilometer per hour) Change the Measurement Unit Change the Measurement Unit ! Hold down the [S/S] button to change the measurement unit following the adjacent diagram: ! Distance measurement unit interchange between m (meter) and ft (feet). ! Temperature measurement unit interchange between 8C (Celsius) and 8F (Fahrenheit). ! Speed measurement unit interchange between m/h (mile per hour) and Km/h (kilometer per hour).