Polk Audio React Sound Bar User Guide 2 - Page 29

Contents Connections Playback Settings Tips Appendix 3 Point the remote control of the TV at the remote control sensor of this unit and press the remote control button to be learned (e.g. the button to increase the volume) 3 times. If learning is successful, the status LED blinks in green once, and the voice guidance responds. If learning is unsuccessful, the status LED blinks in red once. Repeat steps 2 and 3 if this happens. 0 To delete all learned data, press and hold on the sound bar for 10 seconds. 0 Operations cannot be performed with the remote control learning function during the low energy mode. 0 Other operations cannot be performed when in remote control learning mode. 0 Remote control learning may not be possible depending on the type of TV remote control. 0 When the status LEDs blink in white again, press the TV remote control button (e.g. the button to increase the volume) once more. 4 To learn a new function, repeat steps 2 and 3 with the next function. 5 Press and hold the main unit's for 3 seconds. The unit exits remote control learning mode. 6 Confirm that the operation (e.g. increasing the volume) can be performed on this unit with the TV remote control. 29