Plantronics DISCOVERY 925 User Guide - Page 11

Earpiece Controls Turn on the earpiece Press and hold the call control button for 2 seconds until the indicator glows blue. If earpiece flashes red 3 times when you turn on the earpiece then the battery is very low and should be recharged. NOTE When your earpiece is in standby mode, the indicator is off. To confirm that your earpiece is on, press any button. You should see a blue light flash. Turn off the earpiece Press and hold the call control button for 4 seconds until the indicator glows red. When power is off, indicator stays off. NOTE If you're wearing the earpiece, you hear ascending tones when the power turns on and descending tones when the power turns off. Answer or reject a call When your earpiece rings, tap the power button once; you should hear 1 low tone. To reject a call and send the caller to voice mail, press the call control button for 2 seconds. NOTE Your phone may ring before your earpiece rings. Wait until you hear the ring in your earpiece to press the call control button and answer the call. End a call During active call, tap the call control button. Make a call When the earpiece is paired to your phone and in range, enter phone number on your phone and press send. The call automatically transfers to your earpiece. Transfer a call between earpiece and phone During an active call, press and hold the call control button for 2 seconds. You will hear a single low tone followed by a double low tone. 7