Pioneer SPH-10BT Owners Manual - Page 26
Bluetooth device - firmware
View all Pioneer SPH-10BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
English HUB ERR → The USB device connected via a USB hub is not supported by this unit. - Connect the USB device directly to this unit using a USB cable. CHECKUSB → The USB connector or USB cable has short-circuited. - Check that the USB connector or USB cable is not caught in something or damaged. → The connected USB device consumes more than maximum allowable current. - Disconnect the USB device and do not use it. Turn the ignition switch OFF and back to ACC or ON. Connect only compliant USB devices. → The iPhone operates correctly but does not charge. - Make sure the connection cable for the iPhone has not shorted out (e.g., not caught in metal objects). After checking, turn the ignition switch OFF and back to ON, or disconnect the iPhone and reconnect. ERROR-19 → Communication failed. - Perform one of the following operations, then return to the USB source. • Turn the ignition switch OFF and back to ON. • Disconnect the USB device. • Change to a different source. → iPhone failure. - Disconnect the cable from the iPhone. Once the iPhone's main menu is displayed, reconnect the iPhone and reset it. ERROR-23 → USB device was not formatted properly. - Format the USB device with FAT12, FAT16 or FAT32. ERROR-16 → The iPhone firmware version is old. - Update the iPhone version. → iPhone failure. - Disconnect the cable from the iPhone. Once the iPhone's main menu is displayed, reconnect the iPhone and reset it. STOP → There are no songs in the current list. - Select a list that contains songs. NO DEV → No Bluetooth device found. - Connect the unit and iPhone via Bluetooth (page 14). CN FAIL → Bluetooth connection with iPhone failed. - Make a connection again on the mobile device. DISCNCT → Bluetooth connection lost. - Make a connection again on the mobile device. Bluetooth device ERROR-10 → The power failed for the Bluetooth module of the unit. - Turn the ignition switch OFF and back to ACC or ON. APP CNCT APP → Pioneer Smart Sync connection is not made. - Make a connection with Pioneer Smart Sync (page 16). - 26 -