Pentax IQZoom 70 IQZoom 70 Manual - Page 29

Switching the mode Each time you depress the MODE button 0 with your fingernail, the mode in the data-display window 0 switches from "Year-Month-Day" to "Month-Day-Year" to "Day-Month-Year" to "DayHour-Minute" (A- or P-Hour:Minute) to "OFF." Stop depressing the button when the desired mode appears in the window. "OFF" indicates no data are imprinted. Correcting the data • Depress the SELECT button 0 at first, and the display will switch from any mode to "Hour:Minute"with the ":" mark flickering. Each time you depress the SELECT button 0 , the flicker moves from ":" to "Minute" to "Hour" to "Day" to "Month" to "Year." Make the display you wish to correct, flicker. • Depress the ADJUST button 0 for changing the digits of the display you wish to correct. The digit advances one by one each time you depress the ADJUST button 0 . If you keep it depressed, the digit will, in a second or two, advance continuously. Correcting the second 1. Depress the SELECT button 0 , and ":" will flicker. 2. Depress the ADJUST button 0 according to a time-signal, and ":" will stop flickering for an instant, setting the second to zero. Correcting "Hour:Minute" and "Year-Month-Day" 1. Make any digit or digits of the hour, minute, year, month, and day (which you wish to correct) flicker by depressing the SELECT button 0. 2. Set the digit or digits correctly by depressing the ADJUST button 0 Year = 85 - 09 (1985 - 2009) Month = 1 - 12 Day = 1 - 31 Hour = 0 - 23 (A or P, 1 - 12) Minute = 00 - 59 Correcting "A," "P," and "Hour:Minute" 1. Set the display to "Day-Hour-Minute" by depressing the MODE button 0. 2. Keep depressing the ADJUST button 0 for a few seconds, and "Day" will switch to "A" (a.m.) or "P" (p.m.). Example: 10 15:30 -)-P 3:30 27