Panasonic WVSP305 WVSP302 User Guide - Page 68
Con the settings relating to Panasonic alarm protocol [Notification]
View all Panasonic WVSP305 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Configure the settings relating to Panasonic alarm protocol [Notification] Click the [Notification] tab on the "Alarm" page. (☞ Pages 22 and 23: How to display/operate the setup menu) The settings relating to Panasonic alarm protocol can be configured in this section. ■ Panasonic alarm protocol notification [Panasonic alarm protocol] Select "On" or "Off" to determine whether or not to provide notification by Panasonic alarm protocol according to the settings for the "Alarm" and "Diag." checkboxes of "Destination of notification" below. • When an alarm is detected ("Alarm") • When a notification of the remaining capacity of the SD memory card has been provided ("Diag.") • When the SD memory card has become full ("Diag.") • When the SD memory card cannot be recognized ("Diag.") Default: Off ■ Destination of notification [Address 1] - [Address 8] Enter the destination IP address of the Panasonic alarm protocol from the following. Host name is unavailable for the IP address. Up to 8 destination addresses can be registered. "Alarm" checkbox: When the checkbox is checked, the Panasonic alarm notification will be provided upon an alarm occurrence. "Diag." checkbox: When the checkbox is checked, notification using Panasonic alarm protocol will be provided in the following cases. • When notification of the remaining capacity of the SD memory card has been provided • When the SD memory card has become full • The SD memory card cannot be recognized "Destination IP address": Enter the destination address. To delete the registered IP address, click the [Delete] button respective to the desired IP address. Important: • Confirm that the destination IP addresses are regis- tered correctly. When a registered destination does not exist, notification may be delayed. Note: • When "On" is selected, notification of the alarm occurrence will be provided to the registered destination addresses in order (to IP address 1 first, to IP address 8 last). [Destination port] Select a destination port for the Panasonic alarm protocol from the following. Available range: 1-65535 Default: 1818 [Retry times] Select a retry time for the Panasonic alarm protocol. Available range: 0 - 30 Default: 2 68