Panasonic UF-6200 Operating Instructions - Page 56
Address Confirmation Function - clear memory
![]() |
View all Panasonic UF-6200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Sending Documents Wrong Transmission Prevention Function Address Confirmation Function Settings can be made so that transmission will always start after confirming the address. When Start is pushed and address confirmation has been set, a message prompting operations to confirm the address will be displayed if the address has not been confirmed first. This function operates if setting "125 CONFIRM STATIONS" of Fax Parameter set to "VALID". (See page 40) When telephoning from an external telephone, address confirmation is not displayed. 1 Operate "Manual Number Dialing". (See page 49) This function is also available if you send documents with following methods: • One-Touch Dialing (See pages 51 and 85) • Abbreviated Dialing (see page 51) • Group Dialing (See page 81) CONFIRM STN WITH ∨ ∧ THEN PRESS START 2 Press or to confirm stations. It is possible to add or remove addresses. To add an address, input the address for addition. To remove an address, display the address for removal and press Clear (See Note 1). 3 * DIALING * NO.002 5551234 The document is stored with a file number in the memory. Following this, the telephone numbers are dialed in sequence. 56 NOTE 1. If an address has been added or removed when confirming addresses, address confirmation is required again.
![](/manual_guide/products/panasonic-uf6200-operating-instructions-75f88f7/56.png)