Panasonic SDR-S70K SDRH100P User Guide - Page 109
for VideoCam Suite, play back properly
View all Panasonic SDR-S70K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Problem When connected by the USB cable, this unit is not detected by the PC. When connected by the USB cable, this unit is not detected by the other devices. When the USB cable is disconnected, an error message will appear on the PC. The power of the DVD burner cannot be turned on. The sound does not play back properly when a DVD disc that has been copied using the DVD burner is played back. Cannot see the PDF operating instructions for VideoCam Suite 3.5. Check points ≥ After re-inserting the SD card into the unit, reconnect the supplied USB cable. ≥ Select another USB terminal on the PC. ≥ Check the operating environment. (l 89, 99) ≥ Connect the supplied USB cable again after restarting the PC and turning on this unit again. ≥ When connected to other devices using only the battery, reconnect using the AC adaptor. ≥ To disconnect the USB cable safely, double-click the icon in the task tray and follow the instructions on the screen. ≥ When the unit is connected to the DVD burner, use the respective AC adaptors for both this unit and the DVD burner. ≥ When the scenes recorded on an SD card by setting [AUDIO REC] to [MPEG] are copied to a DVD disc using the DVD burner and then played back with any other devices, sound may not play back properly. In this case, record scenes by setting [AUDIO REC] to [DOLBY] and then copy to the disc. Or use the software supplied with this unit to copy the scenes. ≥ You will need Adobe Acrobat Reader 5.0 or later or Adobe Reader 7.0 or later to read the PDF operating instructions for VideoCam Suite 3.5. 109 VQT3E42