Panasonic DC-S1R Basic Owners Manual CA - Page 481

17. Materials Removing dirt on the image sensor The image sensor is very precise and delicate, so be sure to observe the following when you do have to clean it yourself. 0 Blow dust off the surface of the image sensor using a commercially available blower. Do not blow the dust off with excessive power. 0 Do not put the blower brush further inside than the lens mount. 0 Do not let the blower brush touch the image sensor as the image sensor may get scratched. 0 Do not use any objects except a blower brush to clean the image sensor. 0 If you cannot remove the dirt or dust with the blower, consult the dealer or Panasonic. ™ Cleaning the Viewfinder If the viewfinder is dirty, then remove the eye cup and clean. While pushing the eye cup lock lever (1), rotate the eye cup in the direction of the arrow and remove (2). Blow dirt off the surface of the viewfinder using a commercially available blower, then lightly wipe with a soft, dry cloth. 0 After cleaning, align the fitting marks (#) 3 and rotate the eye cup in the direction of the arrow until a click is heard (4). 0 Be careful not to lose the eye cup.      DVQX1651 (ENG) 481