Panasonic DC-S1R Basic Owners Manual CA - Page 197
camera. When [Exposure Comp. Reset] is set to [OFF]
![]() |
View all Panasonic DC-S1R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 197 highlights
8. Metering/Exposure/ISO Sensitivity 0 In [M] mode, you can compensate the exposure by setting the ISO sensitivity to [AUTO]. 0 When [Auto Exposure Comp.] is set to [ON], the flash output will automatically be set to the level appropriate to the exposure compensation. 0 When the exposure compensation value falls below or exceeds n3 EV, the brightness of the recording screen will no longer change. Press the shutter button halfway or use AE Lock to reflect the value on the recording screen. 0 When the exposure compensation value falls below or exceeds the n3 EV range, exposure compensation values on the status LCD are indicated with [ ]/[ ]. (l 37) 0 The set exposure compensation value is stored even if you turn off the camera. (When [Exposure Comp. Reset] is set to [OFF]) 0 The standard value for correct exposure can be adjusted Exposure Offset Adjust.] (l 335) 0 You can set the exposure compensation value to be reset when the camera is turned off Exposure Comp. Reset] (l 335) 0 You can change the operation of the [ ] button WB/ISO/Expo. Button] (l 342) 0 Exposure Bracket can be set and flash output can be adjusted on the exposure compensation screen Exposure Comp. Disp. Setting] (l 342) DVQX1651 (ENG) 197
![](/manual_guide/products/panasonic-dcs1r-basic-owners-manual-ca-57d0727/197.png)