Panasonic AK-HC931B Operating Instructions - Page 31

Specifications Power supply: DC 12 V (when external power is supplied) AC 150 V-240 V (when CCU is connected) Power consumption: 33 W (during external power supply operation) 43 W (when CCU is connected) indicates safety information. Operating temperature range: 32F to 104F (0C to +40C) Storage temperature range: -4F to 140F (-20C to +60C) Operating ambient humidity: Less than 85% Weight: Approx. 10.7 lbs (4.85 kg) Dimensions: 5 (W)11-1/16 (H)14-3/8 (D) inch (excluding protrusions) 126  280  365 mm Basic items 1) Pickup device: 2/3 million pixel ITCCD  3 2) System: GBR pickup system 3) Color separation optical system: f/1.4 prism 4) Optical filters: CC: 3200K, 4300K, 6300K, Cross Diffusion ND: CAP, Through, 1/4, 1/16, 1/64 5) Lens mount: Bayonet type 6) Output standard: SMPTE 296M/274M 7) Sensitivity: f/10.0, 2000 lux, 3200 K, white reflectance 89.9% 8) Horizontal modulation: More than 45% (27.5 MHz) 9) S/N ratio: 54 dB (Y: 30 MHz) 10) Horizontal frequency: 44.955 kHz, 750-line frame /33.716 kHz, 1125 line frame 11) Vertical frequency: 59.94 Hz, progressive /59.94 Hz, interlace Input/output signals 1) Mic input: -20, -30, -40, -50, -60 dBm (XLR 3-pin female2) Gain selected by switch 2) INCOM: 0 dBm/600 ohms (XLR 5-pin, female2) (Mixing is controlled separately for PGM1 and PGM2.) 3) Monitor output: HD signals = 1Vp-p, 75 ohms (BNC) Output signals can be selected using the monitor output selector switch. 4) QTV output: VBS signal = 1 Vp-p, 75 ohms (BNC) 5) G/L input: 1 BNC connector (tri-level SYNC) 6) AUX output: VBS signal = 1 Vp-p, 75 ohms (BNC) (when optional unit has been installed) Control 1) Power selection: EXT, OFF, CCU 2) USER SEL: Functions specified by menu items can be allocated to the switch. 3) RET A/B selection: For selecting the return signal 4) Front tally selection: Front tally HIGH, LOW, OFF (VF unit) 5) Viewfinder marker selection: Center marker, safety zone, 4:3 marker 6) Gain selection: LOW, MID, HIGH 7) Output selection: CAM, BAR, TEST 8) White balance mode: A, B, preset 9) Shutter speed selection: 1/100, 1/125 1/250, 1/500, 1/1000, 1/2000 10) AWB, ABB settings 11) Menu selection 12) CALL SW 13) INCOM: MIC ON/OFF, receive or PGM level 14) MIC setting: MIC power, MIC gain, MIC1 selection 15) Optical filter setting: REM, LOCAL selection and LOCAL setting *When the CCU is connected, the selection functions for 6) to 10) are not effective. Weight and dimensions shown are approximate. Specifications are subject to change without notice. 31