Panasonic AGHVX200P Memory Card Camcorder - Page 92
Screen displays continued, INDEX/MEMO/MARK IN recording display
View all Panasonic AGHVX200P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Screen displays (continued) 20 Focus control display Displays the focus control information with 99-00. In the auto focus mode, AF appears. In the manual focus mode, MF appears. When the display is set to macro control, the black and white of AF or MF are displayed in reverse. 95 (Focal distance: infinity) : 00 (Focal distance: approx. 5 cm) Depending on the zoom position, the macro range may not be enabled. Also, depending on the zoom position, the lower limit value of macro range may be different. The units can be switched between feet and m in the ZOOM•FOCUS option of the setting menu DISPLAY SETUP screen. 21 INDEX/MEMO/MARK IN recording display This display lights when the USER button to which the INDEX/MEMO function has already been allocated is pressed while recording and the index/memo signals are recorded. It blinks when the USER button is pressed before recording. (Index/memo signal recording standby status) 22 Recommended ND filter The recommended ND filter under the current shooting conditions is displayed here. 23 ND filter display ND filter selected is displayed. When [ND--] is displayed, the ND filter may be out of alignment. (OFF, the position except 1/8, 1/64) Check the position of the ND filter switch. 24 Gain display Displays the gain value of the image amplifier configured. (During the auto mode, AGC is displayed.) When the CAMERA DATA option on the setting menu DISPLAY SETUP screen is set to ON, the value of the gain used during shooting is also displayed during playback using tape. 25 AWB operation display The white balance operation is indicated here. 26 AWB information display Displays the information of white balance. ATW: When ATW is set P3.2K/P5.6K: In the case of preset Ach/Bch: In the case of A/B LOCK: When ATW is locked 27 Displays marker During shooting, pressing the ZEBRA button once or twice will display the marker. 28 Optical Image Stabilizer ( ) display [ ] also appears during tape playback as camera data when images were shot in the optical image stabilization mode if ON was selected under CAMERA DATA of the setting menu DISPLAY SETUP screen. 29 Scene file name display (in camera mode)/ DUB display (in dubbing mode) (Pages 54 and 86) 30 Remaining battery charge As the remaining battery charge drops, the display changes as follows: When the battery has completely discharged, ( ) blinks. (When the AC adapter is being used, a display other than may appear: this is not a sign of malfunctioning.) 31 Media remaining memory display There is no display while the remaining memory is being calculated. Also, the remaining memory is not displayed during slow playback using tape. "LOOP" is displayed during Loop recording (LOOP REC). 32 Operational state display REC : Recording PAUSE : Recording pause : Play pause STNDBY : Standby (the cylinder-head is stopped) A. DUB : Standby for dubbing record A. DUB : Dubbing record : Play ( ): Fast-forward/Fast-forward play (Rewind/Fast-backward play) ( ): Slow play (Reverse slow play) CHK : Rec check ( ): Cue (reverse cue) ( ): Frame-by-frame (Reverse Frame-by-frame) BLANK : Blank search 92