Panasonic AGDVC80 AGDVC80 User Guide - Page 42

Setting menus RECORDING SETUP screen Item/ (display mode) Description of settings REC SPEED (Camera) (VCR) For selecting the recording time mode. SP : SP (standard play) mode LP : LP (long play) mode AUDIO REC (Camera) (VCR) For selecting the system for converting the recording to PCM audio. 12 bit : 12-bit/32kHz 16 bit : 16-bit/48kHz MIC GAIN 1 (Camera) For setting the input level of the external microphone which is connected to the INPUT 1 connector. -50 dB -60 dB MIC GAIN 2 (Camera) For setting the input level of the external microphone which is connected to the INPUT 2 connector. -50 dB -60 dB 1394 TC REGEN (VCR) For selecting the time code to be recorded when recording the signals of a component connected to the DV connector. OFF: The signals are recorded using the time code which was set using the TCG item and FIRST REC TC item. ON: The signals are recorded using the time code of the signals which have been input to the DV connector. O When ON has been selected as this item's setting, this setting takes precedence over the TCG item and FIRST REC TC item settings. O When no signals are supplied to the DV connector, the TCG item and FIRST REC TC item settings are followed. TCG (Camera) (VCR) For setting the operation mode in which the internal time code generator is to be run. FREE RUN: The internal time code generator is run regardless of the operation mode. REC RUN: The internal time code generator is run during recording. FIRST REC TC (Camera) (VCR) For selecting the time code which is to be recorded when recording is started. REGEN: Recording proceeds in such a way that the time code continues on (is regenerated) from the time code on the tape. PRESET: The time code is not regenerated from the time code on the tape. The time code is recorded using the value set in the TC PRESET item serving as the initial value. However, the time code is forcibly regenerated when shooting with frameto-frame continuity has been performed. Item/ (display mode) Description of settings TC PRESET (Camera) (VCR) For setting the initial value of the time code to be recorded. This item's setting is valid when PRESET has been selected as the setting for the FIRST REC TC item. 1394 UB REGEN (VCR) For selecting the user's bit to be recorded when recording the signals of the component connected to the DV connector. OFF: The user's bit selected for the UB MODE item is used for the recording. ON: The user's bit of the signals input to the DV connector is used for the recording. O When ON has been selected as this item's setting, this setting takes precedence over the UB MODE item setting. O The user's bit is not recorded if the signals do not contain the user's bit information. O When no signals are supplied to the DV connector, the UB MODE item setting is followed. UB MODE (Camera) (VCR) For setting what is to be recorded as the user's bit. USER: The user's information is recorded. TIME: The time of the recording is recorded. Hours Minutes 22 22 22 00 Seconds DATE: The date of the recording is recorded. 22 22 22 22 Year Month Hours Day UB PRESET (Camera) (VCR) TCG: The time code generator's value is recorded. For setting the user's bit. However, USER must be selected for the UB MODE item setting. The underlining indicates the factory setting. 42