Panasonic AGDVC80 AGDVC80 User Guide - Page 38

Setting menus SCENE FILE screen Item/ (display mode) Description of settings DETAIL LEVEL For adjusting the detail amount. (Camera) -7 --- 0 --- +7 CHROMA LEVEL For adjusting the chroma level. (Camera) -7 --- 0 --- +7 CHROMA PHASE (Camera) MASTER PED (Camera) A. IRIS LEVEL (Camera) For finely adjusting the chroma phase. -7 --- 0 --- +7 For adjusting the black master pedestal which serves as the video reference. -15 --- 0 --- +15 For setting the auto iris target value. -4 --- 0 --- +4 SKIN TONE DTL (Camera) For switching the skin tone detail ON or OFF. When ON is selected, the detail in the skin tone areas is diminished and the graininess of the skin is reduced. OFF ON MATRIX (Camera) For selecting the matrix table and expressing the colors during shooting. NORM: Colors suited to shooting outdoors or under light sources using halogen lamps are expressed. FLOU: Colors suited to shooting indoors under fluorescent light sources are expressed. NAME EDIT (Camera) For editing the name of the scene file selected by the scene file dial. SAVE/INIT (Camera) SAVE: For saving the scene file settings after changes have been made to them. O If the menu mode is released without saving the changes, the original scene file settings will be restored when operation is switched to the VCR mode or the power is turned off. INITIAL: For returning the scene file settings selected by the scene file dial to the factory settings. CAMERA SETUP screen Item/ (display mode) Description of settings SYNCRO SCAN (Camera) ASPECT CONV (Camera) COLOR BAR (Camera) SETUP (Camera) For adjusting the shutter speed of synchro scan used when shooting TV screens, etc. If the OPERATION lever is left tilted in the 3 or 4 direction, the speed at which the setting changes is increased, and a beep is heard. 1/60.3 --- 1/250.0 For selecting the aspect ratio of the images to be recorded. NORM: The images are recorded in the standard 4:3 mode. LETTER BOX: The aspect ratio is set to the 16:9 mode, and the images are recorded in this mode. Black bands are recorded at the top and bottom of the screen. For setting the color bar display to ON or OFF. OFF ON O Even when the color bar display has been set to ON, it will return to OFF when operation is switched to the VCR mode or the power is turned off. For setting whether to add the setup level (black level). 0%: The setup level is not added. 7.5%: The 7.5% setup level is added for recording. The underlining indicates the factory setting. 38