Panasonic AG-UX90NTSC AG-UX90 Operating Instructions - Page 28
Battery capacity indication, Checking the remaining power of the battery
View all Panasonic AG-UX90NTSC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Checking the remaining power of the battery You can check the remaining power of the battery by looking at the battery capacity indication displayed on this unit's screen or by looking at the supplied battery AG-VBR59. ∫ Checking the remaining power using this unit Battery capacity indication ≥ The display changes as the battery capacity reduces. If the battery discharges, then will flash red. # # # # ≥ Depending on the menu setting, the battery capacity indication is not displayed. (l 173) [DISP SETUP] # [CARD & BATTERY] ∫ Checking the remaining power using the battery If you press the CHECK button when charging is not in progress, the indicator (LED lamps) will light in green so that you can check the remaining power of the battery. パ A CHECK button B Indicator ≥ When the LED lamp does not light up even if you press the CHECK button, the battery is exhausted. Charge the battery. How to read the indicator An approximate guide of the charging progress is indicated by the flashing position of the LED lamps when charging is in progress. The LED lamps turn off when charging is complete. :Flashing in green/ :Lit in green/ :Off LED lamp status When checking the remaining power During charging Remaining power of the battery / Charging progress 0% to 25% 25% to 50% 50% to 75% 75% to 100% ≥ The display of the indicator is an approximate guide. When the battery pack is connected to the video camera or the charger, refer to the remaining power display of the connected device. The display of the connected device may differ from that of the battery pack's indicator. - 28 -