Panasonic AG-UX90NTSC AG-UX90 Operating Instructions - Page 187
During USB Device mode
View all Panasonic AG-UX90NTSC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 187 highlights
Display Description Behavior and cause CARD ERROR. PLEASE REFORMAT. This is displayed when the SD card cannot be formatted. ≥ Check the SD card. ≥ Replace the SD card in the card slot at which the error has occurred. UNABLE TO FORMAT. Formatting is not possible due to, ≥ Check the SD card. for example, a problem with the SD card. Cannot delete data on card. The SD card cannot be formatted. CANNOT PROTECT. The content versions do not match. This is displayed when you try to set protection for scenes recorded with another device, for example. ≥ Match the device and content version. CANNOT RESET NUMBER. The SD card cannot be used with this unit. ≥ Insert a recordable SD card. THUMBNAIL RECOVERY This is displayed if the SD card is HAS FAILED. removed or writing to the SD card fails while recovery is in progress. ≥ Check the SD card. THUMBNAIL DATA ERROR IS DETECTED. This is displayed when thumbnail information is not recorded correctly. ≥ The applicable thumbnail information will be recovered after this message disappears. CANNOT SELECT MORE The number of scenes that can be SCENES. selected with this unit has reached the maximum limit. ≥ Reselect scenes after finishing the current editing task. SCENE FILE WRITE FAILED This is displayed if the SD card is removed or writing to the SD card fails while a scene file is being saved. ≥ Check the SD card. During USB Device mode Display DISCONNECT USB CABLE. Description An error has occurred while accessing the SD card, or the OS is not supported. Behavior and cause ≥ Check the SD card. ≥ Check to see if the OS is supported. - 187 -