Onkyo CS-245DAB User Manual English - Page 28

Listening to the Radio-Continued TUNER INPUT ENTER PRESET MEMORY CLEAR Presetting FM Stations Automatically (Auto Preset) With the Auto Preset function, you can automatically preset all of the FM radio stations available in your area in one go. Presets make it easy to select your favorite stations and eliminate the need to tune the radio manually each time you want to change stations. As an alternative to this Auto Preset function, there's also a Manual Preset function that lets you manually preset individual FM stations. Auto Preset Caution! Any existing presets will be deleted when the Auto Preset function is run. 1 Press the [TUNER] button, or the [INPUT] button on the top panel, repeatedly until "FM" appears. Make sure the FM antenna is positioned to achieve the best possible reception. 2 Press the [PRESET MEMORY] button. "Auto Preset?" appears on the display. 3 To start the Auto Preset function, press the [ENTER] button. Up to 40 stations can be preset and presets are stored in frequency order. If you want to interrupt the Auto Preset process, press the [CLEAR] button. Note: • Depending on your location, a preset may be stored with no station, and you'll hear only noise when you select it. In this case, delete the preset (see page 29). Presetting FM/DAB Stations Manually With the Preset Write function, you can manually preset individual FM and DAB radio stations. Presets make it easy to select your favorite stations and eliminate the need to tune the radio manually each time you want to change stations. FM stations can also be preset automatically. About Presets You can store up to 40 FM and 40 DAB stations as presets. 1 Tune into the station that you want to store as a preset. 2 Press and hold down the [PRESET MEMORY] button to the preset number flashes. When the preset has been stored, the preset number will change from blinking to steadily lit. Preset numbers are automatically stored starting with the lowest unused number. If all 40 FM or 40 DAB presets have been set, the display will indicate "Preset FULL," and no further presets can be stored. You'll need to erase an existing preset before storing another one. En-28