Oki OKIPOS T400DT-Parallel Users Guide - Page 63

Horizontal and Vertical Print Position commands.

Get Oki OKIPOS T400DT-Parallel PDF manuals and user guides View all Oki OKIPOS T400DT-Parallel manuals
Add to My Manuals
Save this manual to your list of manuals

Page 63 highlights

Special Notes 1. Use of this command will set the Vertical/Horizontal Offset setting of the printer configuration until a new Base Reference Point command is issued or the setting is changed from the operator panel. See Section 2: Printer Configuration. 2. This command may be used more than once in a print job. 3. An alternative to using this command is to make changes to your current Horizontal and Vertical Print Position commands. Example: Let's say the current base reference point is H=1, V=1 and you wish to move all the fields on your label downward vertically by 150 dots. You could either (1) add the Base Reference Point command or (2) change all the vertical position commands by an additional 150 dots. 4. For a more detailed example of the Base Reference Point command, see "Print Area" in this section. 5. The allowable field ranges for this command are: Horizontal aaaa Vertical bbbb T400 -0832 to 0832 -3200 to 3200 T410 -1248 to 1248 -4800 to 4800 54

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
54
Special Notes
1. Use of this command will set the Vertical/Horizontal Offset setting of the
printer configuration until a new Base Reference Point command is issued or
the setting is changed from the operator panel. See Section 2: Printer
Configuration.
2.
This command may be used more than once in a print job.
3.
An alternative to using this command is to make changes to your current
Horizontal and Vertical Print Position commands.
Example:
Let’s say the current base reference point is H=1, V=1 and you wish to move
all the fields on your label downward vertically by 150 dots. You could
either (1) add the Base Reference Point command or (2) change all the
vertical position commands by an additional 150 dots.
4.
For a more detailed example of the Base Reference Point command, see
“Print Area” in this section.
5.
The allowable field ranges for this command are:
T400
T410
Horizontal
-0832 to 0832
-1248 to 1248
aaaa
Vertical
-3200 to 3200
-4800 to 4800
bbbb