Oki ES9465 ES9465/ES9475 Copying Guide - Page 10

1 BEFORE USING EQUIPMENT BASIC Menu for the Copier Function The BASIC menu for the copier function shows the following information: 21 20 19 18 1 17 2 16 15 3 14 13 4 5 67 8 9 10 11 12 1. Function display The function being used, such as copying, is displayed. 2. Message indication area This shows a brief description of the functions or the current status of this equipment in message form. 3. Equipment status indication area ( P.10) This shows the size, paper type or amount of paper remaining in each tray. 4. Index tabs (BASIC, EDIT, IMAGE) ( P.101, P.147) These are for switching between the menus of "BASIC", "EDIT" and "IMAGE". 5. Alert message indication area This shows alert messages such as the replacement timing of the toner cartridges or the waste toner box. When this equipment is managed with the user management function and department management function In the above case, the job quota assigned to each user or department appears here for approx. 5 seconds after user authentication. The displayed number is the smaller one of either user ( ) or department ( ). y The display may differ depending on the management status of this equipment. y For details of the user management function or the department management function, ask your administrator. 6. [APS] (automatic paper selection) button ( P.58) This is for changing the mode to automatic paper selection. 7. [ZOOM] button ( P.65) This is for changing the reproduction ratio of images. 8. [2-SIDED] button ( P.91) This is for selecting simplex/duplex copying (e.g. 1 -> 2-sided, 2 -> 2 sided). 9. [FINISHING] button ( P.74) This is for selecting a sorting mode. 10. [ORIGINAL MODE] button ( P.63) This is for selecting an original mode. 11. Date and time 8 BASIC Menu for the Copier Function