Netgear XCM89UP Hardware Installation Guide - Page 37

To ground the chassis, CAUTION

Get Netgear XCM89UP PDF manuals and user guides View all Netgear XCM89UP manuals
Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

M6100 - Campus Edge and SMB Core Chassis Switch, Blades, and Daughter Cards To ground the chassis: 1. Locate the grounding point on the back of the chassis. 2. Strip 0.5 inch (1.2 cm) of insulation from the stranded copper wire cable. 3. Insert the stripped wire into the cable lug. CAUTION: Be sure that no copper is visible between the lug and the cable insulation. 4. Crimp the lug onto the cable according to the manufacturer's specifications. 5. Insert the screws through the lug and into the grounding point on the back of the chassis. 6. Connect the other end of the wire to a known reliable earth ground point at your site. Install an M6100 Chassis Switch 37 M6100 Hardware Installation Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
M6100 - Campus Edge and SMB Core Chassis Switch, Blades, and Daughter Cards
Install an M6100 Chassis Switch
M6100 Hardware Installation Guide
37
To ground the chassis:
1.
Locate the grounding point on the back of the chassis.
2.
Strip 0.5 inch (1.2 cm) of insulation from the stranded copper wire cable.
3.
Insert the stripped wire into the cable lug.
CAUTION:
Be sure that no copper is visible between the lug and the cable insulation.
4.
Crimp the lug onto the cable according to the manufacturer’s specifications.
5.
Insert the screws through the lug and into the grounding point on the back of the chassis.
6.
Connect the other end of the wire to a known reliable earth ground point at your site.