Netgear M4300-28G Software Setup Manual Software Version 12.x - Page 3
Contents
View all Netgear M4300-28G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Contents Chapter 1 Get Started Supported switches 5 Available publications 6 Register your switch 6 Overview of the options to access the switch 7 Overview of the local browser interface 7 Start the switch and observe the power-on self-test 8 Prepare a terminal if you intend to use a console port 8 Prepare a computer with terminal emulation software 9 Access the switch through a console port 9 Set up or find the switch IP address configuration 10 Use the local browser interface to set up the IP address configuration 11 Use a console port and the ezconfig utility to set up the IP address configuration 14 Use a console port and the CLI to set up the IP address configuration 19 Find the IP address configuration assigned by a DHCP server 20 Use UPnP or Bonjour to find the switch 20 Access the local browser interface when you know the IP address 22 Configure an SNMPv3 user profile using the local browser interface . . . . 22 Chapter 2 Use the Auto Install Configuration Auto Install configuration concepts 25 Switch IP address assignment concepts 25 TFTP IP address and configuration file name concepts 26 About conflicting TFTP server configurations 26 About DNS server requirements 26 About obtaining a configuration file 27 Host-specific configuration file 27 Default network configuration file 27 About obtaining an image from a TFTP server through Auto Install . . . . . 28 Configure Auto Install 29 Configure Auto Install through the CLI 30 Configure Auto Install through the local browser interface 30 Monitor and complete the Auto Install process 31 Event logging for the Auto Install process 33 3