NEC NP-PA1705UL-B Installation Manual - Page 142
Adjustment method, buttons to adjust the corners or sides of the screen and then press
View all NEC NP-PA1705UL-B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
5. Using On-Screen Menu Adjustment method 1. Align the cursor with the [WARP] of the [GEOMETRIC CORRECTION] menu and the press the ENTER. • Adjustment screen will be displayed on. 2. Press the buttons to align the cursor (blue box) with the target adjustment point and then press the ENTER. • The cursor will change into an adjustment point (yellow in color). 3. Press the buttons to adjust the corners or sides of the screen and then press the ENTER. • The cursor will back to yellow box. Explanation for correcting distortion • Eight adjustment points can be moved independently. • For left and right sides, use ◀/▶ buttons for adjusting the range of distortion, and ▼/▲ buttons for adjusting the distortion peak. • For top and bottom sides, use ▼/▲ buttons for adjusting the range of distortion, and ◀/▶ buttons for adjusting the distortion peak. • For corners, use buttons for moving positions. a c b b a d d c e e f h g g h f 4. For adjusting other points, repeat Step2 onwards. 5. When the adjustment is completed, move the cursor onto the [EXIT] on the adjustment screen and press the ENTER. • The screen will be switched to the [GEOMETRIC CORRECTION] menu. The adjustment completion screen will be displayed on. 6. Press ◀ or ▶ button to move the cursor onto [OK] then press [ENTER]. • The adjusted values for [WARP] are stored and the screen display goes back to the [GEOMETRIC CORRECTION]. TIP: • A commercially available USB mouse is available to perform correction. (→ page 47) 109