NEC NP-PA1705UL-B User Manual - Page 11
CAUTION, Periodically clean dust and other debris from the power plug
View all NEC NP-PA1705UL-B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Important Information CAUTION Power cord REQUIRED Handling the power cord • The projector should be installed close to an easily accessible power outlet. • When connecting the power cord to the projector's AC IN terminal, make sure the connector is fully and firmly inserted. Be sure to fix the power cord using the power cord stopper. Loose connection of the power cord could lead to fire or electric shock. REQUIRED UNPLUG THE POWER CORD Handling the power cord by following below to avoid fire or electric shock • When connecting or disconnecting the power cord, pull the power cord out by holding onto its plug. • Unplug the power cord from the power outlet before cleaning the product or when not planning to use the product for an extended time. • When the power cord or plug is heat or damaged, unplug the power cord from the power outlet, and contact your dealer. Periodically clean dust and other debris from the power plug • Failure to do so could result in fire or electric shock. REQUIRED REQUIRED Disconnect power cords and other cables before moving the projector • Before moving the product, make sure the product power is off, then unplug the power cord from the power outlet and check that all cables connecting the product to other devices are disconnected. Do not use the power cord with a power tap • Adding an extension cord may lead to fire as a result of overheating. PROHIBITED x