NEC NP-PA1004UL-B User Manual - Page 222
PC Control Terminal D-Sub 9P, Pins 1
![]() |
View all NEC NP-PA1004UL-B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 222 highlights
PC Control Terminal (D-Sub 9P) To TxD of PC To RxD of PC To GND of PC 8. Appendix 12345 6789 To RTS of PC To CTS of PC NOTE: • Pins 1, 4, 6 and 9 are no used. • Jumper "Request to Send" and "Clear to Send" together on both ends of the cable to simplify cable connection. • For long cable runs it is recommended to set communication speed within projector menus to 9600 bps. 198
![](/manual_guide/products/nec-nppa1004ulb-user-manual-49a2159/222.png)
8. Appendix
198
PC Control Terminal (D-Sub 9P)
1
5
2
4
3
6
7
9
8
To GND of PC
To RxD of PC
To TxD of PC
To RTS of PC
To CTS of PC
NOTE:
•
Pins 1, 4, 6 and 9 are no used.
•
Jumper “Request to Send” and “Clear to Send” together on both ends of the cable to simplify cable connection.
•
For long cable runs it is recommended to set communication speed within projector menus to 9600 bps.