NEC NP-MC382W User Manual - English - Page 110
(3) Network Settings, Information, Wired Lan
View all NEC NP-MC382W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
3 NETWORK SETTINGS 7. Connecting to a Network Move the cursor to [ NETWORK SETTINGS] at the bottom right of the start-up screen and press the ENTER button to display the [NETWORK SETTINGS] screen. ① ② ③ ④ ⑤ ⑥ ① INFORMATION Displays information regarding the wired LAN and wireless LAN of the projector. • To return to the NETWORK SETTINGS screen, press the EXIT button. ② NAME Sets the PROJECTOR NAME and HOST NAME. Item name PROJECTOR NAME HOST NAME Description Set the PROJECTOR NAME. • Initial value: "PJ-XXXXXXXXX" The initial value "PJ-XXXXXXXXX" represents the "PJ-" + "Serial Number". • Allowable characters: alphanumeric symbols (including space) • Number of characters: 1-16 characters Set the HOST NAME. • Initial value: "pj-XXXXXXXXX" The initial value "pj-XXXXXXXXX" represents the "pj-" + "Serial Number". • Allowable characters: alphanumeric, "-" NOTE: • You can not enter "-" at the beginning or end of the HOST NAME. • Number of characters: 1-16 characters ③ WIRED LAN Configure the PROFILE of the wired LAN, DHCP, IP ADDRESS, SUBNET MASK, GATEWAY, DNS and so on. • When using a wired LAN, set the PROFILE to [ENABLE] and configure the necessary settings. • If you are not using a wired LAN, set the profile to [DISABLE]. • Once you have configured the settings, move the cursor to [OK] and press the ENTER button. 99